mechanical engineer thesis topics

How to Select Mechanical Engineering Research Topics?

Table of Contents

Selecting the right mechanical engineering research topics is crucial for driving impactful innovation and addressing pressing challenges. Here’s a step-by-step guide to help you choose the best research topics:

Identify Your Interests: Start by considering your passions and areas of expertise within mechanical engineering. What topics excite you the most? Choosing a subject that aligns with your interests will keep you motivated throughout the research process.
Assess Current Trends: Stay updated on the latest developments and trends in mechanical engineering. Look for emerging technologies, pressing industry challenges, and areas with significant research gaps. These trends can guide you towards relevant and timely research topics.
Conduct Literature Review: Dive into existing literature and research papers within your field of interest. Identify gaps in knowledge, unanswered questions, or areas that warrant further investigation. Building upon existing research can lead to more impactful contributions to the field.
Consider Practical Applications: Evaluate the practical implications of potential research topics. How will your research address real-world problems or benefit society? Choosing topics with tangible applications can increase the relevance and impact of your research outcomes.
Consult with Advisors and Peers: Seek guidance from experienced mentors, advisors, or peers in the field of mechanical engineering. Discuss your research interests and potential topics with them to gain valuable insights and feedback. Their expertise can help you refine your ideas and select the most promising topics.
Define Research Objectives: Clearly define the objectives and scope of your research. What specific questions do you aim to answer or problems do you intend to solve? Establishing clear research goals will guide your topic selection process and keep your project focused.
Consider Resources and Constraints: Take into account the resources, expertise, and time available for your research. Choose topics that are feasible within your constraints and align with your available resources. Balancing ambition with practicality is essential for successful research endeavors.
Brainstorm and Narrow Down Options: Generate a list of potential research topics through brainstorming and exploration. Narrow down your options based on criteria such as relevance, feasibility, and alignment with your interests and goals. Choose the most promising topics that offer ample opportunities for exploration and discovery.
Seek Feedback and Refinement: Once you’ve identified potential research topics, seek feedback from colleagues, advisors, or experts in the field. Refine your ideas based on their input and suggestions. Iteratively refining your topic selection process will lead to a more robust and well-defined research proposal.
Stay Flexible and Open-Minded: Remain open to new ideas and opportunities as you progress through the research process. Be willing to adjust your research topic or direction based on new insights, challenges, or discoveries. Flexibility and adaptability are key qualities for successful research endeavors in mechanical engineering.

By following these steps and considering various factors, you can effectively select mechanical engineering research topics that align with your interests, goals, and the needs of the field.

Step by Step Guide on The Best Way to Finance Car

The Best Way on How to Get Fund For Business to Grow it Efficiently

Useful Links

How much will your dissertation cost?

Have an expert academic write your dissertation paper!

Dissertation Services

Get unlimited topic ideas and a dissertation plan for just £45.00

Order topics and plan

Get 1 free topic in your area of study with aim and justification

Yes I want the free topic

The Best Mechanical Engineering Dissertation Topics and Titles

Published by Carmen Troy at January 5th, 2023 , Revised On August 18, 2023

Introduction

Engineering is a vast subject that encompasses different branches for a student to choose from. Mechanical engineering is one of these branches. Writing a mechanical engineering dissertation from scratch is a difficult task due to the complexities involved, but the job is still not impossible.

Are you looking to select the best mechanical engineering dissertation topic for your dissertation? To help you get started with brainstorming for mechanical engineering dissertation topics, we have developed a list of the latest topics that can be used for writing your mechanical engineering dissertation.

These topics have been developed by PhD qualified writers of our team , so you can trust to use these topics for drafting your own dissertation.

You may also want to start your dissertation by requesting a brief research proposal from our writers on any of these topics, which includes an introduction to the topic, research question , aim and objectives, literature review , along with the proposed methodology of research to be conducted. Let us know if you need any help in getting started.

Check our dissertation example to get an idea of how to structure your dissertation .

Review step by step guide on how to write your own dissertation here.

2022 Mechanical Engineering Research Topics

Topic 1: an investigation into the applications of iot in autonomous and connected vehicles.

Research Aim: The research aims to investigate the applications of IoT in autonomous and connected vehicles

Objectives:

To analyse the applications of IoT in mechanical engineering
To evaluate the communication technologies in autonomous and connected vehicles.
To investigate how IoT facilitates the interaction of smart devices in autonomous and connected vehicles

Topic 2: Evaluation of the impact of combustion of alternative liquid fuels on the internal combustion engines of automobiles

Research Aim: The research aims to evaluate the impact of the combustion of alternative liquid fuels on the internal combustion engines of automobiles

To analyse the types of alternative liquid fuels for vehicles and their implications
To investigate the benchmarking of alternative liquid fuels based on the principles of combustion performance.
To evaluate the impact of combustion of alternative liquid fuels on the internal combustion engines of automobiles with conventional engines

Topic 3: An evaluation of the design and control effectiveness of production engineering on rapid prototyping and intelligent manufacturing

Research Aim: The research aims to evaluate the design and control effectiveness of production engineering on rapid prototyping and intelligent manufacturing

To analyse the principles of design and control effectiveness of production engineering.
To determine the principles of rapid prototyping and intelligent manufacturing for ensuring quality and performance effectiveness
To evaluate the impact of production engineering on the design and control effectiveness of rapid prototyping and intelligent manufacturing.

Topic 4: Investigating the impact of industrial quality control on the quality, reliability and maintenance in industrial manufacturing

Research Aim: The research aims to investigate the impact of industrial quality control on the quality, reliability and maintenance in industrial manufacturing

To analyse the concept and international standards associated with industrial quality control.
To determine the strategies of maintaining quality, reliability and maintenance in manufacturing.
To investigate the impact of industrial quality control on the quality, reliability and maintenance in industrial manufacturing.

Topic 5: Analysis of the impact of AI on intelligent control and precision of mechanical manufacturing

Research Aim: The research aims to analyse the impact of AI on intelligent control and precision of mechanical manufacturing

To analyse the applications of AI on mechanical manufacturing
To evaluate the methods of intelligent control and precision of the manufacturing
To investigate the impact of AI on intelligent control and precision of mechanical manufacturing for ensuring quality and reliability

Covid-19 Mechanical Engineering Research Topics

Investigate the impacts of coronavirus on mechanical engineering and mechanical engineers..

Research Aim: This research will focus on identifying the impacts of Coronavirus on mechanical engineering and mechanical engineers, along with its possible solutions.

Research to study the contribution of mechanical engineers to combat a COVID-19 pandemic

Research Aim: This study will identify the contributions of mechanical engineers to combat the COVID-19 pandemic highlighting the challenges faced by them and their outcomes. How far did their contributions help combat the Coronavirus pandemic?

Research to know about the transformation of industries after the pandemic.

Research Aim: The study aims to investigate the transformation of industries after the pandemic. The study will answer questions such as, how manufacturing industries will transform after COVID-19? Discuss the advantages and disadvantages.

Damage caused by Coronavirus to supply chain of manufacturing industries

Research Aim: The focus of the study will be on identifying the damage caused to the supply chain of manufacturing industries due to the COVID-19 pandemic. What measures are taken to recover the loss and to ensure the continuity of business?

Research to identify the contribution of mechanical engineers in running the business through remote working.

Research Aim: This study will identify whether remote working is an effective way to recover the loss caused by the COVID-19 pandemic? What are its advantages and disadvantages? What steps should be taken to overcome the challenges faced by remote workers?

Mechanical Dissertation Topics of 2021

Topic 1: mini powdered metal design and fabrication for mini development of waste aluminium cannes and fabrication.

Research Aim: The research will focus on producing and manufacturing copula furnaces and aluminium atomizers with available materials to manufacture aluminium powder metal.0.4 kg of refined coke will be chosen to measure content and energy balance and calculate the design values used to produce the drawings.

Topic 2: Interaction between the Fluid, Acoustic, and vibrations

Research Aim: This research aims to focus on the interaction between the Fluid, Acoustic, and vibrations

Topic 3: Combustion and Energy Systems.

Research Aim: This research aims to identify the relationship between Combustion and Energy Systems

Topic 4: Study on the Design and Manufacturing

Research Aim: This research will focus on the importance of design and manufacturing

Topic 5: Revolution in the Design Engineering

Research Aim: This research aims to highlight the advances in design engineering

Best Mechanical Dissertation Topics of 2021

Topic 1: an overview of the different research trends in the field of mechanical engineering..

Research Aim: This research aims to analyse the main topics of mechanical engineering explored by other researchers in the last decade and the research methods. The data used is accumulated from the years 2009 to 2019. The data used for this research is used from the “Applied Mechanics Review” magazine.

Topic 2: The Engineering Applications of Mechanical Metamaterials.

Research Aim: This research aims to analyse the different properties of various mechanical metamaterials and how they can be used in mechanical engineering. This research will also discuss the potential uses of these materials in other industries and future developments in this field.

Topic 3: The Mechanical Behaviour of Materials.

Research Aim: This research will look into the properties of selected materials for the formation of a product. The study will take the results of tests that have already been carried out on the materials. The materials will be categorised into two classes from the already prepared results, namely destructive and non-destructive. The further uses of the non-destructive materials will be discussed briefly.

Topic 4: Evaluating and Assessment of the Flammable and Mechanical Properties of Magnesium Oxide as a Material for SLS Process.

Research Aim: The research will evaluate the different properties of magnesium oxide (MgO) and its potential use as a raw material for the SLS (Selective Laser Sintering) process. The flammability and other mechanical properties will be analysed.

Topic 5: Analysing the Mechanical Characteristics of 3-D Printed Composites.

Research Aim: This research will study the various materials used in 3-D printing and their composition. This research will discuss the properties of different printing materials and compare the harms and benefits of using each material.

Topic 6: Evaluation of a Master Cylinder and Its Use.

Research Aim: This research will take an in-depth analysis of a master cylinder. The material used to create the cylinder, along with its properties, will be discussed. The use of the master cylinder in mechanical engineering will also be explained.

Topic 7: Manufacturing Pearlitic Rail Steel After Re-Modelling Its Mechanical Properties.

Research Aim: This research will look into the use of modified Pearlitic rail steel in railway transportation. Modifications of tensile strength, the supported weight, and impact toughness will be analysed. Results of previously applied tests will be used.

How Can ResearchProspect Help?

ResearchProspect writers can send several custom topic ideas to your email address. Once you have chosen a topic that suits your needs and interests, you can order for our dissertation outline service , which will include a brief introduction to the topic, research questions , literature review , methodology , expected results , and conclusion . The dissertation outline will enable you to review the quality of our work before placing the order for our full dissertation writing service !

Electro-Mechanical Dissertation Topics

Topic 8: studying the electro-mechanical properties of multi-functional glass fibre/epoxy reinforced composites..

Research Aim: This research will study the properties of epoxy reinforced glass fibres and their use in modern times. Features such as tensile strength and tensile resistance will be analysed under different current strengths. Results from previous tests already carried out will be used to explain their properties.

Topic 9: Comparing The Elastic Modules of Different Materials at Different Strain Rates and Temperatures.

Research Aim: This research will compare and contrast a selected group of materials and look into their elastic modules. The modules used are the results taken from previously carried out experiments. This will explain why a particular material is used for a specific purpose.

Topic 10: Analysing The Change in The Porosity and Mechanical Properties of Concrete When Mixed With Coconut Sawdust.

Research Aim: This research will analyse the properties of concrete that are altered when mixed with coconut sawdust. Porosity and other mechanical properties will be evaluated using the results of previous experiments. The use of this type of concrete in the construction industry will also be discussed.

Topic 11: Evaluation of The Thermal Resistance of Select Materials in Mechanical Contact at Sub-Ambient Temperatures.

Research Aim: In this research, a close evaluation of the difference in thermal resistance of certain materials when they come in contact with a surface at sub-ambient temperature. The properties of the materials at the temperature will be noted. Results from previously carried out experiments will be used. The use of these materials will be discussed and explained, as well.

Topic 12: Analysing The Mechanical Properties of a Composite Sandwich by Using The Bending Test.

Research Aim: In this research, we will analyse the mechanical properties of the components of a composite sandwich through the use of the bending test. The results of the tests previously carried out will be used. The research will take an in-depth evaluation of the mechanical properties of the sandwich and explain the means that it is used in modern industries.

Mechanical Properities Dissertation Topics

Topic 13: studying the mechanical and durability property of magnesium silicate hydrate binders in concrete..

Research Aim: In this research, we will evaluate the difference in durability and mechanical properties between regular concrete binders and magnesium silicate hydrate binders. The difference between the properties of both binders will indicate which binder is better for concrete. Features such as tensile strength and weight it can support are compared.

Topic 14: The Use of Submersible Pumping Systems.

Research Aim: This research will aim to analyse the use of a submersible pumping system in machine systems. The materials used to make the system, as well as the mechanical properties it possesses, will be discussed.

Topic 15: The Function of a Breather Device for Internal combustion Engines.

Research Aim: In this research, the primary function of a breather device for an internal combustion engine is discussed. The placement of this device in the system, along with its importance, is explained. The effects on the internal combustion engine if the breather device is removed will also be observed.

Topic 16: To Study The Compression and Tension Behaviour of Hollow Polyester Monofilaments.

Research Aim: This research will focus on the study of selected mechanical properties of hollow polyester monofilaments. In this case, the compression and tension behaviour of the filaments is studied. These properties are considered in order to explore the future use of these filaments in the textile industry and other related industries.

Topic 17: Evaluating the Mechanical Properties of Carbon-Nanotube-Reinforced Cementous Materials.

Research Aim: This research will focus on selecting the proper carbon nanotube type, which will be able to improve the mechanical properties of cementitious materials. Changes in the length, diameter, and weight-based concentration of the nanotubes will be noted when analysing the difference in the mechanical properties. One character of the nanotubes will be of optimal value while the other two will be altered. Results of previous experiments will be used.

Topic 18: To Evaluate the Process of Parallel Compression in LNG Plants Using a Positive Displacement Compressor

Research Aim: This research aims to evaluate a system and method in which the capacity and efficiency of the process of liquefaction of natural gas can avoid bottlenecking in its refrigerant compressing system. Advantages of the parallel compression system in the oil and gas industry will be discussed.

Topic 19: Applying Particulate Palm Kernel Shell Reinforced Epoxy Composites for Automobiles.

Research Aim: In this research, the differences made in applying palm kernel shell particulate to reinforced epoxy composites for the manufacturing of automobile parts will be examined. Properties such as impact toughness, wear resistance, flexural, tensile, and water resistance will be analysed carefully. The results of the previous tests will be used. The potential use of this material will also be discussed.

Topic 20: Changes Observed in The Mechanical Properties of Kevlar KM2-600 Due to Abrasions.

Research Aim: This research will focus on observing the changes in the mechanical properties of Kevlar KM2-600 in comparison to two different types of S glass tows (AGY S2 and Owens Corning Shield Strand S). The surface damage, along with fiber breakage, will be noted among all three fibers. The effects of the abrasions on all three fibers will be emphasised. The use of Kevlar KM2 and the other S glass tows will also be discussed along with other potential applications.

Order a Proposal

Worried about your dissertation proposal? Not sure where to start?

Choose any deadline
Plagiarism free
Unlimited free amendments
Free anti-plagiarism report
Completed to match exact requirements

Industrial Application of Mechanical Engineering Dissertation Topics

Topic 1: the function of a fuel injector device..

Research Aim: This research focuses on the function of a fuel injector device and why this component is necessary for the system of an internal combustion engine. The importance of this device will be explained. The adverse effects on the entire system if the equipment is either faulty or completely removed will also be discussed.

Topic 2: To Solve Optimization Problems in a Mechanical Design by The Principles of Uncertainty.

Research Aim: This research will aim to formulate an optimization in a mechanical design under the influence of uncertainty. This will create an efficient tool that is based on the conditions of each optimization under the risk. This will save time and allow the designer to obtain new information in regards to the stability of the performance of his design under the uncertainties.

Topic 3: Analysing The Applications of Recycled Polycarbonate Particle Materials and Their Mechanical Properties.

Research Aim: This research will evaluate the mechanical properties of different polycarbonate materials and their potential to be recycled. The materials with the ability to be recycled are then further examined for potential use as a 3-dimensional printing material. The temperature of the printer’s nozzle along with the nozzle velocity matrix from previous experiments is used to evaluate the tensile strengths of the printed material. Other potential uses of these materials are also discussed.

Topic 4: The Process of Locating a Lightning Strike on a Wind Turbine.

Research Aim: This research will provide a detailed explanation of the process of detecting a lightning strike on a wind turbine. The measurement of the magnitude of the lightning strike, along with recognising the affected area will be explained. The proper method employed to rectify the damage that occurred by the strike will also be discussed.

Topic 5: Importance of a Heat Recovery Component in an Internal Combustion Engine for an Exhaust Gas System.

Research Aim: The research will take an in-depth evaluation of the different mechanics of a heat recovery component in an exhaust gas system. The functions of the different parts of the heat recovery component will be explained along with the importance of the entire element itself. The adverse effect of a faulty defected heat recovery component will also be explained.

“Feel free to contact us if you require custom dissertation topics and titles for your dissertation. ResearchProspect Ltd is a UK registered academic writing company which can provide you with highly qualified writers to assist you in the process of the formation of your dissertation. For more information about the type of services we offer.“

Related: Civil Engineering Dissertation

Important Notes:

As a student of mechanical engineering looking to get good grades, it is essential to develop new ideas and experiment on existing mechanical engineering theories – i.e., to add value and interest in the topic of your research.

The field of mechanical engineering is vast and interrelated to so many other academic disciplines like civil engineering , construction , law , and even healthcare . That is why it is imperative to create a mechanical engineering dissertation topic that is articular, sound, and actually solves a practical problem that may be rampant in the field.

We can’t stress how important it is to develop a logical research topic; it is the basis of your entire research. There are several significant downfalls to getting your topic wrong; your supervisor may not be interested in working on it, the topic has no academic creditability, the research may not make logical sense, there is a possibility that the study is not viable.

This impacts your time and efforts in writing your dissertation as you may end up in the cycle of rejection at the very initial stage of the dissertation. That is why we recommend reviewing existing research to develop a topic, taking advice from your supervisor, and even asking for help in this particular stage of your dissertation.

Keeping our advice in mind while developing a research topic will allow you to pick one of the best mechanical engineering dissertation topics that not only fulfill your requirement of writing a research paper but also adds to the body of knowledge.

Therefore, it is recommended that when finalizing your dissertation topic, you read recently published literature in order to identify gaps in the research that you may help fill.

Remember- dissertation topics need to be unique, solve an identified problem, be logical, and can also be practically implemented. Take a look at some of our sample mechanical engineering dissertation topics to get an idea for your own dissertation.

How to Structure your Mechanical Engineering Dissertation

A well-structured dissertation can help students to achieve a high overall academic grade.

A Title Page
Acknowledgments
Declaration
Abstract: A summary of the research completed
Table of Contents
Introduction : This chapter includes the project rationale, research background, key research aims and objectives, and the research problems to be addressed. An outline of the structure of a dissertation can also be added to this chapter.
Literature Review : This chapter presents relevant theories and frameworks by analysing published and unpublished literature available on the chosen research topic, in light of research questions to be addressed. The purpose is to highlight and discuss the relative weaknesses and strengths of the selected research area whilst identifying any research gaps. Break down of the topic, and key terms can have a positive impact on your dissertation and your tutor.
Methodology: The data collection and analysis methods and techniques employed by the researcher are presented in the Methodology chapter which usually includes research design, research philosophy, research limitations, code of conduct, ethical consideration, data collection methods, and data analysis strategy .
Findings and Analysis: Findings of the research are analysed in detail under the Findings and Analysis chapter. All key findings/results are outlined in this chapter without interpreting the data or drawing any conclusions. It can be useful to include graphs , charts, and tables in this chapter to identify meaningful trends and relationships.
Discussion and Conclusion: The researcher presents his interpretation of results in this chapter, and states whether the research hypothesis has been verified or not. An essential aspect of this section of the paper is to draw a linkage between the results and evidence from the literature. Recommendations with regards to implications of the findings and directions for the future may also be provided. Finally, a summary of the overall research, along with final judgments, opinions, and comments, must be included in the form of suggestions for improvement.
References: This should be completed in accordance with your University’s requirements
Bibliography
Appendices: Any additional information, diagrams, graphs that were used to complete the dissertation but not part of the dissertation should be included in the Appendices chapter. Essentially, the purpose is to expand the information/data.

About ResearchProspect Ltd

ResearchProspect is a UK based academic writing service that provides help with Dissertation Proposal Writing, PhD proposal writing , Dissertation Writing , Dissertation Editing, and Improvement .

Our team of writers is highly qualified. They are experts in their respective fields. They have been working in the industry for a long, thus are aware of the issues as well as the trends of the industry they are working in.

Need more Topics.?

Free Dissertation Topic

Phone Number

Academic Level Select Academic Level Undergraduate Graduate PHD

Academic Subject

Area of Research

Review Our Best Dissertation Topics 2021 complete list.

Frequently Asked Questions

How to find dissertation topics about mechanical engineering.

To discover mechanical engineering dissertation topics:

Research recent advancements.
Explore industry challenges.
Consider sustainability or automation.
Review academic journals.
Consult with professors.
Opt for a niche aligning with your passion and career aims.

Do This… to Accept Your Paper

Top 10 ilovephd articles of 2023, top 100 journal publications in the world 2024, email subscription.

iLovePhD is a research education website to know updated research-related information. It helps researchers to find top journals for publishing research articles and get an easy manual for research tools. The main aim of this website is to help Ph.D. scholars who are working in various domains to get more valuable ideas to carry out their research. Learn the current groundbreaking research activities around the world, love the process of getting a Ph.D.

WhatsApp Channel

Join iLovePhD WhatsApp Channel Now!

Artificial intelligence

Digital Commons @ University of South Florida

USF Research
USF Libraries

Digital Commons @ USF > College of Engineering > Mechanical Engineering > Theses and Dissertations

Mechanical Engineering Theses and Dissertations

Theses/dissertations from 2023 2023.

Metachronal Locomotion: Swimming, Scaling, and Schooling , Kuvvat Garayev

A Human-in-the-Loop Robot Grasping System with Grasp Quality Refinement , Tian Tan

Theses/Dissertations from 2022 2022

Health Effects of Oil Spills and Dispersal of Oil Droplets and Zooplankton by Langmuir Cells , Sanjib Gurung

Estimating the As-Placed Grout Volume of Auger Cast Piles , Tristen Mee

Hybrid RANS-LES Hemolytic Power Law Modeling of the FDA Blood Pump , Joseph Tarriela

Theses/Dissertations from 2021 2021

Dynamic Loading Directed Neural Stem Cell Differentiation , Abdullah Revaha Akdemir

An Investigation of Cross-links on Crystallization and Degradation in a Novel, PhotoCross-linkable Poly (Lactic Acid) System , Nicholas Baksh

A Framework to Aid Decision Making for Smart Manufacturing Technologies in Small-and Medium-Sized Enterprises , Purvee Bhatia

Formation of Gas Jets and Vortex Rings from Bursting Bubbles: Visualization, Kinematics, and Fluid Dynamics , Ali A. Dasouqi

Development of Carbon and Silicon Carbide Based Microelectrode Implantable Neural Interfaces , Chenyin Feng

Sulfate Optimization in the Cement-Slag Blended System Based on Calorimetry and Strength Studies , Mustafa Fincan

Interrelation of Thermal Stimulation with Haptic Perception, Emotion, and Memory , Mehdi Hojatmadani

Modeling the Ambient Conditions of a Manufacturing Environment Using Computational Fluid Dynamics (CFD) , Yang Liu

Flow Visualization and Aerosol Characterization of Respiratory Jets Exhaled from a Mannequin Simulator , Sindhu Reddy Mutra

A Constitutive-Based Deep Learning Model for the Identification of Active Contraction Parameters of the Left Ventricular Myocardium , Igor Augusto Paschoalotte Nobrega

Sensible/Latent Hybrid Thermal Energy Storage for the Supercritical Carbon Dioxide Brayton Cycle , Kelly Osterman

Evaluating the Performance of Devices Engineering to Quantify the FARS Test , Harsh Patel

Event-Triggered Control Architectures for Scheduling Information Exchange in Uncertain and Multiagent Systems , Stefan Ristevski

Theses/Dissertations from 2020 2020

Experimental Investigation of Liquid Height Estimation and Simulation Verification of Bolt Tension Quantification Using Surface Acoustic Waves , Hani Alhazmi

Investigation of Navigation Systems for Size, Cost, and Mass Constrained Satellites , Omar Awad

Simulation and Verification of Phase Change Materials for Thermal Energy Storage , Marwan Mosubah Belaed

Control of a Human Arm Robotic Unit Using Augmented Reality and Optimized Kinematics , Carlo Canezo

Manipulation and Patterning of Mammalian Cells Using Vibrations and Acoustic Forces , Joel Cooper

Stable Adaptive Control Systems in the Presence of Unmodeled and Actuator Dynamics , Kadriye Merve Dogan

The Design and Development of a Wrist-Hand Orthosis , Amber Gatto

ROBOAT - Rescue Operations Bot Operating in All Terrains , Akshay Gulhane

Mitigation of Electromigration in Metal Interconnects Passivated by Ångstrom-Thin 2D Materials , Yunjo Jeong

Swimming of Pelagic Snails: Kinematics and Fluid Dynamics , Ferhat Karakas

Functional Gait Asymmetries Achieved Through Modeling and Understanding the Interaction of Multiple Gait Modulations , Fatemeh Rasouli

Distributed Control of Multiagent Systems under Heterogeneity , Selahattin Burak Sarsilmaz

Design and Implementation of Intuitive Human-robot Teleoperation Interfaces , Lei Wu

Laser Micropatterning Effects on Corrosion Resistance of Pure Magnesium Surfaces , Yahya Efe Yayoglu

Theses/Dissertations from 2019 2019

Synthesis and Characterization of Molybdenum Disulfide/Conducting Polymer Nanocomposite Materials for Supercapacitor Applications , Turki S. Alamro

Design of Shape-Morphing Structures Consisting of Bistable Compliant Mechanisms , Rami Alfattani

Low Temperature Multi Effects Desalination-Mechanical Vapor Compression Powered by Supercritical Organic Rankine Cycle , Eydhah Almatrafi

Experimental Results of a Model Reference Adaptive Control Approach on an Interconnected Uncertain Dynamical System , Kemberly Cespedes

Modeling of Buildings with Electrochromic Windows and Thermochromic Roofs , Hua-Ting Kao

Design and Testing of Experimental Langmuir Turbulence Facilities , Zongze Li

Solar Thermal Geothermal Hybrid System With a Bottoming Supercritical Organic Rankine Cycle , Francesca Moloney

Design and Testing of a Reciprocating Wind Harvester , Ahmet Topcuoglu

Distributed Spatiotemporal Control and Dynamic Information Fusion for Multiagent Systems , Dzung Minh Duc Tran

Controlled Wetting Using Ultrasonic Vibration , Matthew A. Trapuzzano

On Distributed Control of Multiagent Systems under Adverse Conditions , Emre Yildirim

Theses/Dissertations from 2018 2018

Synthesis and Characterization of Alpha-Hematite Nanomaterials for Water-Splitting Applications , Hussein Alrobei

Control of Uncertain Dynamical Systems with Spatial and Temporal Constraints , Ehsan Arabi

Simulation and Optimization of a Sheathless Size-Based Acoustic Particle Separator , Shivaraman Asoda

Simulation of Radiation Flux from Thermal Fluid in Origami Tubes , Robert R. Bebeau

Toward Verifiable Adaptive Control Systems: High-Performance and Robust Architectures , Benjamin Charles Gruenwald

Developing Motion Platform Dynamics for Studying Biomechanical Responses During Exercise for Human Spaceflight Applications , Kaitlin Lostroscio

Design and Testing of a Linear Compliant Mechanism with Adjustable Force Output , William Niemeier

Investigation of Thermal History in Large Area Projection Sintering, an Additive Manufacturing Technology , Justin Nussbaum

Acoustic Source Localization with a VTOL sUAV Deployable Module , Kory Olney

Defect Detection in Additive Manufacturing Utilizing Long Pulse Thermography , James Pierce

Design and Testing of a Passive Prosthetic Ankle Foot Optimized to Mimic an Able-Bodied Gait , Millicent Schlafly

Simulation of Turbulent Air Jet Impingement for Commercial Cooking Applications , Shantanu S. Shevade

Materials and Methods to Fabricate Porous Structures Using Additive Manufacturing Techniques , Mohsen Ziaee

Theses/Dissertations from 2017 2017

Large Area Sintering Test Platform Design and Preliminary Study on Cross Sectional Resolution , Christopher J. Gardiner

Enhanced Visible Light Photocatalytic Remediation of Organics in Water Using Zinc Oxide and Titanium Oxide Nanostructures , Srikanth Gunti

Heat Flux Modeling of Asymmetrically Heated and Cooled Thermal Stimuli , Matthew Hardy

Simulation of Hemiparetic Function Using a Knee Orthosis with Variable Impedance and a Proprioception Interference Apparatus , Christina-Anne Kathleen Lahiff

Synthesis, Characterization, and Application of Molybdenum Oxide Nanomaterials , Michael S. McCrory

Effects of Microstructure and Alloy Concentration on the Corrosion and Tribocorrosion Resistance of Al-Mn and WE43 Mg Alloys , Hesham Y. Saleh Mraied

Novel Transducer Calibration and Simulation Verification of Polydimethylsiloxane (PDMS) Channels on Acoustic Microfluidic Devices , Scott T. Padilla

Force Compensation and Recreation Accuracy in Humans , Benjamin Rigsby

Experimental Evaluation of Cooling Effectiveness and Water Conservation in a Poultry House Using Flow Blurring ® Atomizers , Rafael M. Rodriguez

Media Velocity Considerations in Pleated Air Filtration , Frederik Carl Schousboe

Orthoplanar Spring Based Compliant Force/Torque Sensor for Robot Force Control , Jerry West

Experimental Study of High-Temperature Range Latent Heat Thermal Energy Storage , Chatura Wickramaratne

Theses/Dissertations from 2016 2016

Al/Ti Nanostructured Multilayers: from Mechanical, Tribological, to Corrosion Properties , Sina Izadi

Molybdenum Disulfide-Conducting Polymer Composite Structures for Electrochemical Biosensor Applications , Hongxiang Jia

Waterproofing Shape-Changing Mechanisms Using Origami Engineering; Also a Mechanical Property Evaluation Approach for Rapid Prototyping , Andrew Jason Katz

Hydrogen Effects on X80 Steel Mechanical Properties Measured by Tensile and Impact Testing , Xuan Li

Application and Analysis of Asymmetrical Hot and Cold Stimuli , Ahmad Manasrah

Droplet-based Mechanical Actuator Utilizing Electrowetting Effect , Qi Ni

Experimental and Computational Study on Fracture Mechanics of Multilayered Structures , Hai Thanh Tran

Designing the Haptic Interface for Morse Code , Michael Walker

Optimization and Characterization of Integrated Microfluidic Surface Acoustic Wave Sensors and Transducers , Tao Wang

Corrosion Characteristics of Magnesium under Varying Surface Roughness Conditions , Yahya Efe Yayoglu

Theses/Dissertations from 2015 2015

Carbon Dioxide (CO 2 ) Emissions, Human Energy, and Cultural Perceptions Associated with Traditional and Improved Methods of Shea Butter Processing in Ghana, West Africa , Emily Adams

Experimental Investigation of Encapsulated Phase Change Materials for Thermal Energy Storage , Tanvir E. Alam

Design Of Shape Morphing Structures Using Bistable Elements , Ahmad Alqasimi

Heat Transfer Analysis of Slot Jet Impingement onto Roughened Surfaces , Rashid Ali Alshatti

Systems Approach to Producing Electrospun Polyvinylidene Difluoride Fiber Webs with Controlled Fiber Structure and Functionality , Brian D. Bell

Self-Assembly Kinetics of Microscale Components: A Parametric Evaluation , Jose Miguel Carballo

Measuring Polydimethylsiloxane (PDMS) Mechanical Properties Using Flat Punch Nanoindentation Focusing on Obtaining Full Contact , Federico De Paoli

A Numerical and Experimental Investigation of Flow Induced Noise In Hydraulic Counterbalance Valves , Mutasim Mohamed Elsheikh

An Experimental Study on Passive Dynamic Walking , Philip Andrew Hatzitheodorou

Use of Anaerobic Adhesive for Prevailing Torque Locking Feature on Threaded Product , Alan Hernandez

Viability of Bismuth as a Green Substitute for Lead in Jacketed .357 Magnum Revolver Bullets , Joel A. Jenkins

A Planar Pseudo-Rigid-Body Model for Cantilevers Experiencing Combined Endpoint Forces and Uniformly Distributed Loads Acting in Parallel , Philip James Logan

Kinematic Control of Redundant Mobile Manipulators , Mustafa Mashali

Passive Symmetry in Dynamic Systems and Walking , Haris Muratagic

Mechanical Properties of Laser-Sintered-Nylon Diamond Lattices , Clayton Neff

Design, Fabrication and Analysis of a Paver Machine Push Bar Mechanism , Mahendra Palnati

Synthesis, Characterization, and Electrochemical Properties of Polyaniline Thin Films , Soukaina Rami

A Technical and Economic Comparative Analysis of Sensible and Latent Heat Packed Bed Storage Systems for Concentrating Solar Thermal Power Plants , Jamie Trahan

Use of FDM Components for Ion Beam and Vacuum Applications , Eric Miguel Tridas

The Development of an Adaptive Driving Simulator , Sarah Marie Tudor

Dual 7-Degree-of-Freedom Robotic Arm Remote Teleoperation Using Haptic Devices , Yu-Cheng Wang

Ductility and Use of Titanium Alloy and Stainless Steel Aerospace Fasteners , Jarrod Talbott Whittaker

Advanced Search

Email Notifications and RSS
All Collections
USF Faculty Publications
Open Access Journals
Conferences and Events
Theses and Dissertations
Textbooks Collection

Useful Links

Rights Information
SelectedWorks
Submit Research

Privacy Copyright

ScholarWorks@UMass Amherst

Home > Engineering > MIE > MIE_DISS

Mechanical & Industrial Engineering Dissertations Collection

Dissertations from 2023 2023.

EXPERIMENTAL INVESTIGATION OF THE VORTEX-INDUCED VIBRATION RESPONSE OF A FLEXIBLY-MOUNTED RIGID CYLINDER IN THE SHEAR-THINNING AND INERTIAL-VISCOELASTIC FLOW REGIMES , Pieter Boersma, Mechanical Engineering

MICRO AND NANO R2R EMBOSSING OF EXTRUDED POLYMERS , Raymond S. Frenkel, Mechanical Engineering

Surface Engineering and Microfabrication of PDMS-Based Devices for Women’s Health Applications , Jamar Hawkins, Mechanical Engineering

ULTRA-HIGH STRAIN RATE MECHANICAL STUDY OF METALS IN THE COLD-SPRAY PROCESS THROUGH LASER-INDUCED PROJECTILE IMPACT TEST , Swetaparna Mohanty, Mechanical Engineering

Additive Manufacturing of Multicomponent Metal Alloys , Shahryar Mooraj and Shahryar Mooraj, Mechanical Engineering

ADDITIVE MANUFACTURING OF HIGH-PERFORMANCE NANOLAMELLAR EUTECTIC HIGH-ENTROPY ALLOYS , Jie Ren, Mechanical Engineering

HEAT TRANSFER CHARACTERISTICS OF LATENT HEAT THERMAL ENERGY STORAGE , Kedar Prashant Shete, Mechanical Engineering

Engineering Mechanical and Biochemical Gradients to Control Cell Behaviors , Feiyu Yang, Mechanical Engineering

MONITORING AND CONTROL OF THE ROLL-TO-ROLL MICROCONTACT PRINTING PROCESS THROUGH NEURAL NETWORK AND REAL-TIME SENSING , Jingyang Yan, Mechanical Engineering

Dissertations from 2022 2022

SOLIDIFICATION EXPERIMENTS AND MAGNETOHYDRODYNAMIC MODELS IN ELECTROMAGNETIC LEVITATION , Gwendolyn Bracker, Mechanical Engineering

Moving Polygon Methods for Incompressible Fluid Dynamics , Chris Chartrand, Mechanical Engineering

The Influence of Flow Mechanotransduction on Endothelial Cells in the Lymphatic Valve Sinus , Joshua Daniel Hall, Mechanical Engineering

Characterizing Mechanical Regulation of Bone Metastatic Breast Cancer Cells , Boyuan Liu, Mechanical Engineering

COMPUTATIONAL STUDY OF INTERNAL FLOW, NEAR NOZZLE AND EXTERNAL SPRAY OF A GDI INJECTOR UNDER FLASH-BOILING CONDITIONS , Chinmoy krushna Mohapatra, Mechanical Engineering

Biomechanical Regulation of Cell Rearrangement and Fate Patterning Under Geometrical Confinement , Tianfa Xie, Mechanical Engineering

Dissertations from 2021 2021

SURFACE ENHANCED RAMAN SPECTROSCOPY (SERS) AS AN APPROACH FOR THE EMERGING LIQUID BIOPSY DIAGNOSTICS , Nariman Banaei, Mechanical Engineering

The Modeling and Control of Highly Flexible Continuous Structures Interacting with Fluids , Todd Currier, Mechanical Engineering

Design and Biomechanical Evaluation of a Clutch-Based Energy Storage and Release Assistive Knee Brace , Ericber Jimenez Francisco, Mechanical Engineering

Simulating the Effects of Floating Platforms, Tilted Rotors, and Breaking Waves for Offshore Wind Turbines , Hannah Johlas, Mechanical Engineering

NUMERICAL MODELING OF ADVANCED PROPULSION SYSTEMS , Peetak P. Mitra, Mechanical Engineering

A Generalized Method for Predictive Simulation-Based Lower Limb Prosthesis Design , Mark Price, Mechanical Engineering

Dissertations from 2020 2020

ROUGH AIRFOIL SIMULATION FOR WIND TURBINE APPLICATIONS , Nathaniel B. deVelder, Mechanical Engineering

Experimental Study of Viscoelastic Fluid-Structure Interactions , Anita Anup Dey, Mechanical Engineering

Considerations for the Design Optimization of Floating Offshore Wind Turbine Blades , Evan M. Gaertner, Mechanical Engineering

NONLINEAR MODELS FOR SYNTHETIC MOORING LINES UNDER EXTREME OCEAN CONDITIONS: AN AQUACULTURE CASE STUDY , Nhu Nguyen, Mechanical Engineering

Surface Driven Flows : Liquid Bridges, Drops and Marangoni Propulsion , Samrat Sur, Mechanical Engineering

THE EFFECT OF OXYGEN ON PROPERTIES OF ZIRCONIUM METAL , Jie ZHAO, Mechanical Engineering

RESISTIVE SWITCHING CHARACTERISTICS OF NANOSTRUCTURED AND SOLUTION-PROCESSED COMPLEX OXIDE ASSEMBLIES , Zimu Zhou, Mechanical Engineering

Dissertations from 2019 2019

Flow-induced oscillations in floating offshore wind turbines , Daniel Carlson, Mechanical Engineering

Cold Spray Deposition of Polymers – Characterization and Optimization , Zahra Khalkhali, Mechanical Engineering

THERMODYNAMIC AND ECONOMIC ANALYSIS OF SEVERAL HYBRID MULTIGENERATION CYCLES AND WASTE HEAT RECOVERY SYSTEMS DRIVEN BY CONCENTRATED SOLAR TOWER , Kasra Mohammadi, Mechanical Engineering

PREDICTIVE SIMULATION OF HUMAN MOVEMENT AND APPLICATIONS TO ASSISTIVE DEVICE DESIGN AND CONTROL , Vinh Nguyen, Mechanical Engineering

STRUCTURAL CONTROL OF OFFSHORE WIND TURBINES USING PASSIVE AND SEMI-ACTIVE CONTROL , Semyung Park, Mechanical Engineering

A Study on Homogeneous Sheared Stably Stratified Turbulence , Gavin Portwood, Mechanical Engineering

Residual Stress Models for Large Eddy Simulation of Stratified Turbulent Flows , Felipe Augusto Ventura de Bragança Alves, Mechanical Engineering

QUANTITATIVE PROBING OF VACANCIES AND IONS DYNAMICS IN ELECTROACTIVE OXIDE MATERIALS , Jiaxin Zhu, Mechanical Engineering

Dissertations from 2018 2018

SUPPORTING ENGINEERING DESIGN OF ADDITIVELY MANUFACTURED MEDICAL DEVICES WITH KNOWLEDGE MANAGEMENT THROUGH ONTOLOGIES , Thomas Hagedorn, Mechanical Engineering

Turbulent mixers for protein folding experiments , Venkatesh Inguva, Mechanical Engineering

AEROELASTIC SIMULATION OF WIND TURBINES USING FREE VORTEX METHODS AND STRATEGIES FOR ACCELERATING THE COMPUTATION , Shujian Liu, Mechanical Engineering

Performance and economic analysis of hybrid microhydro systems , Ram Poudel, Mechanical Engineering

Computational Exploration of Flash-Boiling Internal Flow and Near-Nozzle Spray , Sampath K. Rachakonda, Mechanical Engineering

PROBING LOCAL VACANCY-DRIVEN RESISTIVE SWITCHING IN METAL OXIDE NANOSTRUCTURES , Jiaying Wang, Mechanical Engineering

MODEL-BASED PREDICTIVE ANALYTICS FOR ADDITIVE AND SMART MANUFACTURING , Zhuo Yang, Mechanical Engineering

Dissertations from 2017 2017

The rheology and roll-to-roll processing of shear-thickening particle dispersions , Sunilkumar Khandavalli, Mechanical Engineering

Bio-based Wind Turbine Blades: Renewable Energy Meets Sustainable Materials for Clean, Green Power , Rachel Koh, Mechanical Engineering

Dissertations from 2016 2016

Eulerian CFD Modeling of Multiphase Internal Injector Flow and External Sprays , Eli T. Baldwin, Mechanical Engineering

Simulating the Hydrodynamics of Offshore Floating Wind Turbine Platforms in a Finite Volume Framework , Maija Benitz, Mechanical Engineering

Reduced order fluid-structure interaction models for thin shells with non-zero Gaussian curvatures to understand the response of aneurysms to flow , Gary Han Chang, Mechanical Engineering

Wind Farm Wake Modeling and Analysis of Wake Impacts in a Wind Farm , Yujia Hao, Mechanical Engineering

Multi-Classifier Fusion Strategy for Activity and Intent Recognition of Torso Movements , Abhijit Kadrolkar, Mechanical Engineering

Dynamic Wetting and Drag Reduction on Superhydrophobic and Liquid-Infused Surfaces , Jeong-Hyun Kim, Mechanical Engineering

Automatic Development and Adaptation of Concise Nonlinear Models for System Identification , William G. La Cava, Mechanical Engineering

A Lower Limb Prosthesis with Active Alignment for Reduced Limb Loading , Andrew LaPre, Mechanical Engineering

A Computational Study of Non-Newtonian Droplet Dynamics , Kyle G. Mooney, Mechanical Engineering

Theoretical Modeling, Experimental Observation, and Reliability Analysis of Flow-induced Oscillations in Offshore Wind Turbine Blades , Pariya Pourazarm, Mechanical Engineering

Design Load Analysis of Two Floating Offshore Wind Turbine Concepts , Gordon M. Stewart, Mechanical Engineering

Dissertations from 2015 2015

Wind Power Capacity Value Metrics and Variability: A Study in New England , Frederick W. Letson, Mechanical Engineering

Vortex-Induced Vibration of Structures with Broken Symmetry , Banafsheh Seyedaghazadeh, Mechanical Engineering

A COMPUTATIONAL STUDY ON EXTENSION OF NON-CONTACT MODULATION CALORIMETRY , Xiao Ye, Mechanical Engineering

Dissertations from 2014 2014

Sustainability-Based Product Design in a Decision Support Semantic Framework , Douglas Eddy, Mechanical Engineering

Structural, Electronic and Catalytic Properties of Graphene-supported Platinum Nanoclusters , Ioanna Fampiou, Mechanical Engineering

OPERATIONAL PLANNING IN COMBINED HEAT AND POWER SYSTEMS , Hariharan Gopalakrishnan, Mechanical Engineering

Methods of Engine Degradation Assessment in the Time-Scale Domain , Jeffrey Charles Simmons, Mechanical Engineering

Lightweight, High-Temperature Radiator for In-Space Nuclear-Electric Power and Propulsion , Briana N. Tomboulian, Mechanical Engineering

SIMULATION AND MODELING OF THE DECAY OF ANISOTROPIC TURBULENCE , Christopher J. Zusi, Mechanical Engineering

Dissertations from 2013 2013

Effect of Total Awake Time on Drivers' Performance and Evaluation of Training Intervention to Mitigate Effects of Total Awake Time on Drivers' Performance , Abd Malek Abdul Hamid, Mechanical Engineering

Tooth Cusp Radius of Curvature as a Dietary Correlate in Primates , Michael Anthony Berthaume, Mechanical Engineering

Techno-Economic Feasibility Study of Ammonia Plants Powered by Offshore Wind , Eric R. Morgan, Mechanical Engineering

Multiphase Flows with Digital and Traditional Microfluidics , Michael Andrew Nilsson, Mechanical Engineering

Dissertations from 2012 2012

A Study on Small Scale Intermittency Using Direct Numerical Simulation of Turbulence , Saba Almalkie, Mechanical Engineering

Acceleration of CFD and Data Analysis Using Graphics Processors , Ali Khajeh Saeed, Mechanical Engineering

The oriented-eddy collision model , Michael B. Martell

The Oriented-Eddy Collision Model , Michael Bernard Martell Jr., Mechanical Engineering

Morphology and Development of Droplet Deformation Under Flow Within Microfluidic Devices , Molly Katlin Mulligan, Mechanical Engineering

The Aerodynamics and Near Wake of an Offshore Floating Horizontal Axis Wind Turbine , Thomas Sebastian, Mechanical Engineering

Modeling the life span of red blood cells , Rajiv Prakash Shrestha

Modeling and planning distributed energy systems online , Kai Wu

Dissertations from 2011 2011

The Parameter Signature Isolation Method and Applications , James Richard McCusker, Mechanical Engineering

A Numerical Study of Droplet Formation and Behavior using Interface Tracking Methods , Sandeep Menon, Mechanical Engineering

Modeling of Flash Boiling Flows in Injectors with Gasoline-Ethanol Fuel Blends , Kshitij Deepak Neroorkar, Mechanical Engineering

Engineering Modeling, Analysis and Optimal Design of Custom Foot Orthotic , Lieselle Enid Trinidad, Mechanical Engineering

Understanding combat related pyschological difficulties in veterans: The role of context based morality , Ramila Usoof

Dissertations from 2010 2010

A comprehensive study of the extensional rheology of complex fluids , Manojkumar Chellamuthu

Modeling of Thermal Non-Equilibrium in Superheated Injector Flows , Shivasubramanian Gopalakrishnan, Mechanical Engineering

Dissertations from 2009 2009

A Pressure-Temperature Dual Sensing Methodology For Injection Molding Monitoring , Zhaoyan Fan, Mechanical Engineering

A pressure-temperature dual sensing methodology for injection molding monitoring , Zhaoyan Fan

An integrated multidisciplinary approach to the design of therapeutic devices for people with mental illness and pervasive developmental disorders , Brian A Mullen

Unsteady dynamics of wind turbine wake, oscillating bubble and falling card , Kapil Varshney

Semantic Methods for Intelligent Distributed Design Environments , Paul W. Witherell, Mechanical Engineering

Dissertations from 2008 2008

Numerical analysis of mixing in variable density turbulent flows , Adel E Alshayji

Self-diagnostic thermal protection systems for future spacecraft , Alaina B Hanlon

Hybrid elastic network model for macromolecular dynamics , Yunho Jang

The streamlined site assessment methodology: A new approach for wind energy site assessment , Matthew A Lackner

Laminar flow control with ultrahydrophobic surfaces , Jia Ou

Multi-Time Scale Modeling strategy for bearing life prognosis , Shuangwen Sheng

Dissertations from 2007 2007

Managing multi-agent risk and system uncertainty using options-based decision policies , Daniel R Ball

Offshore wind farm layout optimization , Christopher Neil Elkinton

Turbulent mixing in stably stratified flows , David A Hebert

Essays on supply chain management , Yue Jin

The dynamics and rheology of shear -banding wormlike micelles and other non -Newtonian fluids , Erik Miller

Advanced Search

Notify me via email or RSS
Collections
Disciplines

Author Corner

Login for Faculty Authors
Faculty Author Gallery
Expert Gallery
University Libraries
Mechanical and Industrial Engineering Webpage
UMass Amherst

This page is sponsored by the University Libraries.

Privacy Copyright

Main navigation

Undergraduate Studies
Graduate Studies
Links & Services
Prospective Students and Admissions
Mechanical Engineering CEGEP Curricula
Mechanical Engineering Out of Province Curricula
Honours Mechanical Engineering Curricula
Complementary Studies
Complementary Technical Courses
Design Concentration
Aeronautical Concentration
Undergraduate Labs
Thesis Projects
Design Projects
Minors in Engineering
Courses Offered
Advising and Contact Information

Thesis Projects (last update November 24, 2023)

The Honours Thesis research projects listed below are available only to McGill Mechanical Engineering Undergraduate students in the Honours program and registered for MECH 403-404 courses .

If you are interested in one of the thesis projects, please send an expression of interest to the contact email provided. Although we do our best to keep this list up-to-date, some projects may no longer be available.

If you are a professor who would like to add or remove a thesis project, please complete the honours project posting form .

Projects for Winter 2024 and Fall 2024:

Thesis project 2023-1.

Title: Development of a method for recycling fibreglass composite wind turbines Supervisor : Prof. Larry Lessard The term(s) to begin: Fall 2023 or Winter 2024 Brief description: There is growing concern about recycling of end-of-life composite materials. Waste fiber and other materials cannot be put into landfills so recycling methods must be developed. Used wind turbine blades can be recycled to recover the fibers and these fibers can be re-used to make materials for 3D printing. So this project aims to solve two simultaneous problems: that of growing amounts of waste and the need for stronger/more high tech materials for the growing 3D printing industry. The project involves experimental manufacturing based on composite materials theory. Contact e-mail : larry.lessard [at] mcgill.ca

Updated: May 2, 2023

Thesis Project 2023-2

Title: Multi-robot collaborative state estimation Supervisor : Prof. James Richard Forbes The term(s) to begin : Fall 2023, Winter 2024 Brief description : Autonomous vehicles, such as autonomous cars, trucks, and trains, must fuse various forms of sensor data together in order to ascertain their position, attitude, velocity, and angular velocity. Typical sensor data includes inertial measurement unit (IMU) data and some sort of position data, such as GPS data, or range data, such as optical camera, radar, or LIDAR data. In multi-robot systems, an individual robot can also utilize information from its neighbors by having the robots communicate their state estimates. However, the estimates of different robots are often correlated, and without properly modelling these cross-correlations, the performance of the estimator might be very poor. This project will then focus on modelling those cross-correlations for collaborative state estimation in multi-robot systems. The main task will involve the development and coding of a sigma point Kalman filter to enable multi-robot navigation; however, based on the student’s interests and background, alternatives to the sigma point Kalman filter could be considered. Students best fit for this project are those interested in using mathematical tools, such as linear algebra, numerical methods, probability theory, and numerical optimization, to solve problems found in robotics. Experience with Matlab and/or C programming is desired. Contact e-mail : james.richard.forbes [at] mcgill.ca

Thesis Project 2023-3

Title: Robot navigation Supervisor : Prof. James Richard Forbes The term(s) to begin : Fall 2023, Winter 2024 Brief description : Autonomous vehicles, such as autonomous cars, trucks, and trains, must fuse various forms of sensor data together in order to ascertain their position, attitude, velocity, and angular velocity. Typical sensor data includes inertial measurement unit (IMU) data and some sort of position data, such as GPS data, or range data, such as optical camera, radar, or LIDAR data. This project will focus on sensor fusion for robot navigation. The first task will be the development and coding of a matrix Lie group integrator, in the spirit of a Runge-Kutta integrator, but tailor to matrix Lie groups. The second task will be the development and coding of a cascaded sigma point Kalman filter to enable multi-agent navigation (i.e., navigation of many robots). Students best fit for this project are those interested in using mathematical tools, such as linear algebra, numerical methods, probability theory, and numerical optimization, to solve problems found in robotics. Experience with python and/or C++ programming is desired. Contact e-mail : james.richard.forbes [at] mcgill.ca

Posted: May 2, 2023

Thesis Project 2023-4

Title : Reconfigurable metamaterials for soft robotics Supervisor : Prof. Damiano Pasini The term(s) to begin : Fall 2023, Winter 2024 Brief description: Mechanical metamaterials are manmade materials, usually fashioned from repeating units, which are engineered to achieve extreme mechanical properties, often beyond those found in most natural materials. In this project, the student will use the lens of mechanics of materials to generate material concepts for soft robotics. Additive manufacturing techniques will be employed to fabricate prototypes and their performance will be examined through mechanical testing. Contact e-mail : damiano.pasini [at] mcgill.ca

Updated: May 9, 2023

Thesis Project 2023-5

Title : Nonlinear dynamics/vibrations of architected materials for aerospace applications Supervisor : Prof. Damiano Pasini and Prof. Mathias Legrand The term(s) to begin : Fall 2023, Winter 2024 Brief description: When launched in space, satellites need to endure an explosive upright boost that generates extremely large vibrations throughout their bodies. If uncontrolled, these vibrations end up spoiling the performance of their components with the risk of making them nonfunctional. In this project we study the nonlinear vibrations of a satellite component made of ultralight weight architected materials of unprecedented performance. The goal is to model its dynamic behaviour and understand the geometric factors that control its highly nonlinear response at the onset of a launch in space. The work involves a combination of theoretical and computational analysis. Contact e-mail : damiano.pasini [at] mcgill.ca

Thesis Project 2023-6

Title: Can you hear the shape of a robot? Supervisor : Prof. Audrey Sedal The term(s) to begin : Fall 2023, Winter 2024 Brief description : Unlike traditional robots, soft robots can take a variety of unusual 3D shapes. However, it is challenging to estimate the shape of a soft robot while it operates, which makes precise control difficult. Inspired by Mark Kac’s question, “Can one hear the shape of a drum?” Short answer: not all the time, due to the existence of isospectral manifolds. This project investigates fusion of acoustic sensing with other modes (e.g., cameras) to estimate the 3D shape of soft robots as they operate. You will build a variety of soft robot prototypes, develop sensing frameworks, and evaluate their performance. This project will involve fabrication, hardware development, programming, and a little bit of geometry.

Contact e-mail : audrey.sedal [at] mcgill.ca

Updated: May 22, 2023

Thesis Project 2023-7

Title : Development of a Digital Twin of a Mill Yard Supervisor : Prof. Inna Sharf The term(s) to begin : Winter 2024, Fall 2024 Brief description: Digital twin is an emerging technology that goes hand in hand with increasing automation of machines,processes and advances in IofT. Professor Sharf’s industrial collaborator, FPInnovations, is working on increasing autonomy and intelligence of log loading machines and transport vehicles operating in the mill yards. This will ultimately be followed by moving the operators from the seats in the machines into an office, i.e., where they can no longer directly observe their environment. Furthermore, other processes, such as, measuring the size of piles, are already executed remotely, for example, with drones, and will soon be executed autonomously, thus producing information on the state of assets in the mill yard. Ultimately, it will be important to have a digital twin of the mill yard, which will provide digital and visual information on the state of the mill yard, in particular, location and size of log piles, the location and status of machines operating in it, incoming and outgoing log trucks, the status (e.g., traversability) of roads and other information. Professor Sharf is interested in beginning the development of such a digital twin. This will require identifying a suitable platform to house the twin, laying out the roadmap for building the twin in a sequence of phases sand developing the phase 0 of the digital twin. Contact e-mail : inna.sharf [at] mcgill.ca

Updated: November 23, 2023

Projects for 2018-2019 school year: may or may not be still available - you may use contact e-mails to find out.

Thesis project 2018-11.

Title: Dynamics of photon-driven lightsails for interstellar flight Supervisor : Prof. Andrew Higgins The term(s) to begin :Fall 2018, Winter 2019, Fall 2019 Brief description : The use of lasers to propel sails via direct photon pressure has the potential to achieve very high velocity spaceflight, greatly exceeding traditional chemical and electric propulsion sources, and enables the serious consideration of interstellar flight. However, the dynamics and stability of thin sails (lightsails) under intense laser illumination is an outstanding problem. This project will examine the dynamics of very thin membranes both theoretically and experimentally. The response of a lightsail to perturbation will be analyzed both analytically and via computer simulation. Use of gasdynamic loading techniques (shock tube) will enable the same driving load to be applied in the laboratory, but without the use of megawatt-class lasers. Experimental diagnostic techniques (photonic doppler velocimetry, 3-D digital image correlation) will be developed to study the lightsail dynamics that will eventually be applied to a laser-driven sail proof-of-concept facility. Personnel sought: Student should have a strong interest in advanced space exploration concepts, with general background in physical optics, numerical simulation, and experimental techniques. Skills involved: Experience with photography and high-speed data acquisition would be helpful. Completion of Mech 321 (Mechanics of Deformable Solids) and Mech 430 (Fluids 2) is required for the project. Contact e-mail : andrew.higgins [at] mcgill.ca

Posted: September 12, 2018

Thesis Project 2018-12

Title: Dynamic soaring on a shock wave Supervisor : Prof. Andrew Higgins The term(s) to begin :Fall 2018, Winter 2019, Fall 2019 Brief description : Dynamic soaring is a technique exploited by birds and sailplanes to increase their flight speed by exploiting differences in airspeed of different masses of air. This project will explore this approach by examining dynamic soaring of a hypersonic glider on a shock wave. In essence, the technique consists of “bouncing” back and forth from either side of a shock wave via a high lift-to-drag turn, increasing the net velocity of the glider. The ability to “surf” on a very strong blast wave (such as resulting from a thermonuclear blast or asteroid impact) from ground all the way to space will be explored. The use of the technique on shock waves that occur in interplanetary space (coronal mass ejections, etc.) that might enable spacecraft to be accelerated to very high velocities “for free” will also be explored. Personnel sought: Student should have a strong interest in advanced space exploration concepts and flight dynamics, with general background in numerical simulation. Skills involved: Completion of Mech 430 (Fluids 2) is required for the project. Contact e-mail : andrew.higgins [at] mcgill.ca

Thesis Project 2018-13

Title: Rapid transit within the solar system via directed energy: laser thermal vs. laser electric propulsion Supervisor : Prof. Andrew Higgins The term(s) to begin :Fall 2018, Winter 2019, Fall 2019 Brief description : Directed energy in the form of a ground or space-based laser providing power to a spacecraft is a disruptive technology that could enable a number of rapid-transit missions in the solar system and interstellar precursor missions. This project will compare two different approaches for a spacecraft to utilize beamed laser power: (1) laser thermal propulsion, wherein a laser is focused into a chamber to heat propellant that is expanded through a nozzle and (2) laser electric propulsion, wherein a laser directed onto a photovoltaic array generates electricity to power electric propulsion (ion engine, etc.). These two concepts will be compared for a number of missions of interest, as defined by NASA: (1) Earth orbit to Mars orbit in no more than 45 days and (2) Traversing a distance of 125 AU in no more than ten years. Personnel sought: Student should have a strong interest in advanced space exploration concepts, with general background in physical optics and numerical simulation. Skills involved: Prior exposure to spacecraft mission design (e.g., experience with ‎Kerbal Space Program, etc.) would be helpful. Completion of Mech 430 (Fluids 2) and Mech 346 (Heat Transfer) is required for the project. Contact e-mail : andrew.higgins [at] mcgill.ca

Thesis Project 2018-14

Title: Impact of dust grain on lightsails for interstellar flight Supervisor : Prof. Andrew Higgins The term(s) to begin :Fall 2018, Winter 2019, Fall 2019 Brief description : Laser-driven lightsails are a promising technique for interstellar flight, however, sails will experience impacts of dust grains in the interplanetary and interstellar medium. The impact of a sub-micron grain can deposit as much as 1 J of energy into the sail when travelling at speeds necessary for interstellar flight. This project will examine the subsequent dynamics of the sail and the damage incurred. This problem will be modelled both analytically and numerically, and experiments will be performed in the lab with gas gun-launched particles onto candidate thin-film materials. Personnel sought: Student should have a strong interest in advanced space exploration concepts, with general background in materials and stress/strain, numerical simulation, and experimental techniques. Skills involved: Experience with ANSYS would be very enabling for the project. Experience with photography and high-speed data acquisition would be helpful. Completion of Mech 321 (Mechanics of Deformable Solids) is required for the project. Contact e-mail : andrew.higgins [at] mcgill.ca

Thesis Project 2018-15

Title: Percolation model for detonation in a system of discrete energy sources Supervisor : Prof. Andrew Higgins The term(s) to begin :Fall 2018, Winter 2019, Fall 2019 Brief description : Detonation waves propagating in combustible gas mixtures exhibit very complex dynamics, with transverse and longitudinal shock waves that sweep across the front. This project will attempt to model this process by treating detonation as an ensemble of interacting blast waves. Approximate, analytic solutions of blast waves will be used to treat the problem. Results will be interpreted with the assistance of percolation theory, a branch of statistical physics. Results will also be compared to reactive Euler simulations using supercomputing resources. Skills required: Strong coding skills (language of your choice) and awareness in advanced mathematics is of interest. Personnel sought: Completion of Mech 430 (Fluids 2) is required for this project. Interest in nonlinear physics and pattern formation in nature would provide helpful motivation for this project. Exposure to concepts in statistical physics (Ad. Thermo) is also desirable. Contact e-mail : andrew.higgins [at] mcgill.ca

Thesis Project 2018-16

Title: Pellet stream propulsion for interstellar flight Supervisor : Prof. Andrew Higgins The term(s) to begin :Fall 2018, Winter 2019, Fall 2019 Brief description : A promising approach to deep space propulsion that may enable interstellar flight is pellet stream propulsion, wherein high velocity pellets (with velocity exceeding that of the spacecraft) are used to impart momentum onto a spacecraft. Such a pellet stream may be able to be collimated and focused over much greater distances than a laser beam, making it an attractive alternative to laser-driven directed energy. This project will examine the ability of a charged particle to be steered and re-directed via a static magnetic field (e.g., quadrupole beam steering, etc.), both via computer simulation and experimental testing in the lab. The ability to steer a small (mm to cm scale) pellet via magnetic field of rare earth magnets at speeds of ~1 km/s would be a significant validation of the concept. Personnel sought: Student should have a strong interest in advanced space exploration concepts, with strong background in electromagnetism and physics. Interest in or familiarity with conventional, fundamental particle accelerators would be desirable. Skills involved: Basic coding skills (language of your choice) and numerical simulation is required. Experience with basic electronics and microcontrollers (Arduino, etc.) and 3-D printing would be very helpful for the project. Contact e-mail : andrew.higgins [at] mcgill.ca

Department and University Information

Department of mechanical engineering.

Prospective Information & Curricula
Program Information and Curricula
Academic Advising Appointment
Courses offered
Faculty of Engineering
Computer Store
Program Information
Financial Information
Funding opportunities
Graduate Student Handbook
Graduate Supervisor
Research Areas
Career Planning Service
Counselling Services
Engineering career Centre
Harassment, Sexual Harassment and Discrimination
International Student Services
McGill Engineering Student Centre
McGill Engineering Undergraduate Society
McGill in Mind
Ombudsperson
Psychiatric Services
Service Point
Student Accounts
Student Aid
Student Health Services
Student Housing
Student Services

BYU ScholarsArchive

Home > Engineering > Mechanical Engineering > Theses and Dissertations

Mechanical Engineering Theses and Dissertations

Theses/dissertations from 2023 2023.

A Series of Improved and Novel Methods in Computer Vision Estimation , James J. Adams

Experimental Validation of a Vibration-Based Sound Power Method , Trent P. Bates

Detecting Lumbar Muscle Fatigue Using Nanocomposite Strain Gauges , Darci Ann Billmire

Heated Supersonic Jet Characteristics From Far-field Acoustical Measurements , Matthew Austin Christian

Cooperative Navigation of Autonomous Vehicles in Challenging Environments , Brendon Peter Forsgren

Heat Transfer to Rolling or Sliding Drops on Inclined Heated Superhydrophobic Surfaces , Joseph Merkley Furner

Lumbar Skin Strain Fields in the Context of Skin Adhered Wearables , Andrew Kent Gibbons

A Statistical Approach for Analyzing Expectations Alignment Between Design Teams and their Project Stakeholders , Matthew Christian Goodson

Interaction of Natural Convection and Real Gas Radiation Over a Vertical Flat Plate , Nathan Hale

Thermal Atomization of Impinging Drops on Superheated Superhydrophobic Surfaces , Eric Lee

An Inexpensive, 3D Printable, Arduino and BluRay-based, Confocal Laser and Fluorescent Scanning Thermal Microscope , Justin Loose

Gradient-Based Optimization of Highly Flexible Aeroelastic Structures , Taylor G. McDonnell

Dynamic Segmental Kinematics of the Lumbar Spine During Diagnostic Movements , Paul McMullin

Friction and Heat Transfer Modeling of the Tool and Workpiece Interface in Friction Stir Welding of AA 6061-T6 for Improved Simulation Accuracy , Ryan Melander

Designed for Better Control: Using Kinematic and Dynamic Metrics to Optimize Robot Manipulator Design , John R. Morrell

Numerical Evaluation of Forces Affecting Particle Motion in Time-Invariant Pressurized Jet Flow , Donald E. Peterson

Modeling the Influence of Vibration on Flow Through Embedded Microchannels , Joseph S. Seamons

Evaluating Effects of Urban Growth Within the Greater Salt Lake Area on Local Meteorological Conditions Using Urban Canopy Modeling , Corey L. Smithson

Soft Robot Configuration Estimation: Towards Load-Agnostic Soft-Bodied Proprioception , Christian Peter Sorensen

Perfusion Pressure-Flow Relationships in Synthetic Poroelastic Vocal Fold Models , Cooper B. Thacker

Methods for Designing Compact and Deployable Origami-Inspired Flat-Foldable Spacecraft Antennas and Other Systems , Collin Ryan Ynchausti

Theses/Dissertations from 2022 2022

Mechanisms for Improvement of Key Mechanical Properties in Polymer Powder Bed Fusion Processes , Clinton Spencer Abbott

Reformulated Vortex Particle Method and Meshless Large Eddy Simulation of Multirotor Aircraft , Eduardo J. Alvarez

Improving Ideation of User Actions Using a Novel Ideation Method , Thomas L. Ashworth

Temperature and Radiation Measurements in a Pressurized Oxy-Coal Reactor , Dustin Peter Badger

Midfoot Motion and Stiffness: Does Structure Predict Function? , Kirk Evans Bassett

The Effects of Various Inlet Distortion Profiles on Transonic Fan Performance , Andrew Michael Bedke

Optical Observation of Large Area Projection Sintering , Derek Black

Investigations into Pressure Profile and Pressure Control in Wrist-Worn Health Monitoring Devices , Roger McAllister Black

Selecting and Optimizing Origami-Based Patterns for Deployable Space Systems , Diana Stefania Bolanos

Developing an Accurate Simulation Model for Predicting Friction Stir Welding Processes in 2219 Aluminum Alloy , Kennen Brooks

An Augmented Reality Maintenance Assistant with Real-Time Quality Inspection on Handheld Mobile Devices , James Thomas Frandsen

Motion Analysis of Physical Human-Human Collaboration with Varying Modus , Seth Michael Freeman

Effects of Optical Configuration and Sampling Efficiency on the Response of Low-Cost Optical Particle Counters , Brady Scott Hales

Developing Ultra-High Resolution 3D Printing for Microfluidics , Kent Richard Hooper

Controlled Pre-Wetting of Spread Powder and Its Effects on Part Formation and Printing Parameters in Binder Jetting Additive Manufacturing , Colton G. Inkley

Enabling Successful Human-Robot Interaction Through Human-Human Co-Manipulation Analysis, Soft Robot Modeling, and Reliable Model Evolutionary Gain-Based Predictive Control (MEGa-PC) , Spencer W. Jensen

Demonstration of a Transient Hot Wire Measurement System Towards a Carbide-Based Sensor for Measuring the Thermal Conductivity of Molten Salts , Peter Charles Kasper

Measured Spectral, Directional Radiative Behavior of Corrugated Surfaces , Kyle S. Meaker

Modified Transient Hot-Wire Needle Probe for Experimentally Measuring Thermal Conductivity of Molten Salts , Brian N. Merritt

Parametric Models of Maize Stalk Morphology , Michael Alan Ottesen

A Formal Consideration of User Tactics During Product Evaluation in Early-Stage Product Development , Trenton Brady Owens

Airship Systems Design, Modeling, and Simulation for Social Impact , Daniel C. Richards

Sub-Grain Characterization of Slip Activity in BCC Tantalum , Tristan Kirby Russell

Tidally Generated Internal Waves from Dual-Ridge Topography , Ian Derik Sanderson

An Investigation into the Role of Geometrically Necessary Dislocations in Multi-Strain Path Deformation in Automotive Sheet Alloys , Rishabh Sharma

Methods for Engineers to Understand, Predict, and Influence the Social Impacts of Engineered Products , Phillip Douglas Stevenson

Principles for Using Remote Data Collection Devices and Deep Learning in Evaluating Social Impact Indicators of Engineered Products for Global Development , Bryan J. Stringham

Improvement of Ex Vivo Testing Methods for Spine Biomechanical Characterization , Aubrie Lisa Taylor

Gradient-Based Wind Farm Layout Optimization , Jared Joseph Thomas

Material Development Toward an Index-Matched Gadolinium-Based Heterogenous Capture-Gated Neutron Detector , Aaron J. Thorum

Optimization of a Smart Sensor Wearable Knee Sleeve for Measuring Skin Strain to Determine Joint Biomechanics , David Steven Wood

Multi-Material 3D-Printed Silicone Vocal Fold Models , Clayton Adam Young

Theses/Dissertations from 2021 2021

Laser Forming of Compliant Mechanisms and Flat-Foldable Furniture , Daniel Calvin Ames

Effects of Static and Dynamic Thermal Gradients in Gas Chromatography , Samuel Avila

Five Degree-of-Freedom Property Interpolation of Arbitrary Grain Boundaries via Voronoi Fundamental Zone Octonion Framework , Sterling Gregory Baird

Optimization of Solar-Coal Hybridization for Low Solar Augmentation , Aaron T. Bame

Characterizing Behaviors and Functions of Joints for Design of Origami-Based Mechanical Systems , Nathan Chandler Brown

Thermal Transport to Impinging Droplets on Superhydrophobic Surfaces , Jonathan C. Burnett

3D Permeability Characterization of Sheared Fiber Reinforcement for Liquid Composite Molding Process Simulation , Collin William Childs

The Impact of Inkjet Parameters and Environmental Conditions in Binder Jetting Additive Manufacturing , Trenton Miles Colton

Control of Post-Weld Fracture Toughness in Friction Stir Processed X-80 HSLA Steel , Nolan Tracy Crook

Sensitivity of Tremor Propagation to Model Parameters , Charles Paul Curtis Jr.

Feasibility and Impact of Liquid/Liquid-encased Dopants as Method of Composition Control in Laser Powder Bed Fusion , Taylor Matthew Davis

Design Validation of a Multi-Stage Gradually Deploying Stent , Dillon J. Despain

Analysis of Closed-Loop Digital Twin , Andrew Stuart Eyring

Completion and Initial Testing of a Pressurized Oxy-Coal Reactor , Scott Hunsaker Gardner

Method for Creating Subject-specific Models of the Wrist in both Degrees of Freedom Using Measured Muscle Excitations and Joint Torques , Blake Robert Harper

CEDAR: A Dimensionally Adaptive Flow Solver for Cylindrical Combustors , Ty R. Hosler

Modeling Current and Future Windblown Utah Dust Events Using CMAQ 5.3.1 , Zachary David Lawless

Acclimation of Contact Impedance and Wrist-Based Pulsatile Signal Measurements Through Electrical Bioimpedance , Diego A. Leon

Characterizing Bacterial Resistance and Microstructure-Related Properties of Carbon-Infiltrated Carbon Nanotube Surface Coatings with Applications in Medical Devices , Stephanie Renee Morco

Effects of Whole Body Vibration on Inhibitory Control Processes , Bennett Alan Mortensen

Exploration of Constant-Force Wristbands for a Wearable Health Device , Thomas Alexander Naylor

Effect of Ported Shroud Casing Treatment Modifications on Operational Range and Limits in a Centrifugal Compressor , Alexander A. Newell

Considering Social Impact when Engineering for Global Development , Hans Jorgen Ottosson

A New Method of Measuring Flow Stress for Improved Modeling of Friction Stir Welding , David John Prymak

Constrained Nonlinear Heuristic-Based MPC for Control of Robotic Systems with Uncertainty , Tyler James Quackenbush

A Study in Soft Robotics: Metrics, Models, Control, and Estimation , Levi Thomas Rupert

Development of an Origami Inspired Composite Deployable Structure Utilizing Compliant Joints as Surrogate Folds , Samuel Porter Smith

Development and Evaluation of an Improved Microbial Inactivation Model for Analyzing Continuous Flow UV-LED Air Treatment Systems , Cole Holtom Thatcher

Micromechanisms of Near-Yield Deformation in BCC Tantalum , Joshua Jr-Syan Tsai

Effects of Carbon-Infiltrated Carbon Nanotube Growth on the Biocompatibility of 316L Stainless Steel , Sterling Charles Voss

Active Thermography for Additive Manufacturing Processes , Nicholas Jay Wallace

System Identification of Postural Tremor in Wrist Flexion-Extension and Radial-Ulnar Deviation , Sydney Bryanna Ward

Effective Temperature Control for Industrial Friction Stir Technologies , Arnold David Wright

Theses/Dissertations from 2020 2020

Characterization of the Factors Influencing Retained Austenite Transformation in Q&P Steels , Derrik David Adams

Instructional Case Studies in the Field of Windfarm Optimization , N. Francesco Baker

LCM Permeability Characterization Over Mold Curvature , Benjamin Grant Betteridge

Linear and Nonlinear Dimensionality-Reduction-Based Surrogate Models for Real-Time Design Space Exploration of Structural Responses , Gregory David Bird

Electrochemical Sensors Enhanced by Convection and by 3D Arrays of Vertically Aligned Carbon Nanotubes , Benjamin James Brownlee

In Vivo Silicon Lance Array Transfection of Plant Cells , Taylor Andrew Brown

Real Time Design Space Exploration of Static and Vibratory Structural Responses in Turbomachinery Through Surrogate Modeling with Principal Components , Spencer Reese Bunnell

On Creases and Curved Links: Design Approaches for Predicting and Customizing Behaviors in Origami-Based and Developable Mechanisms , Jared J. Butler

Jet Impingement Heat Transfer from Superheated, Superhydrophobic Surfaces , David Jacob Butterfield

A Framework for Simulating and Analyzing Multi-UAV Persistent Search and Retrieval with Stochastic Target Appearance , Ryan David Day

Thermal Atomization Due to Boiling During Droplet Impingement on Superhydrophobic Surfaces , Preston Todd Emerson

Error-State Estimation and Control for a Multirotor UAV Landing on a Moving Vehicle , Michael David Farrell

Silicone 3D Printing Processes for Fabricating Synthetic, Self-Oscillating Vocal Fold Models , Taylor Eugene Greenwood

Tidally Generated Internal Waves from Asymmetric Topographies , Kyle Jeffrey Hakes

Page 1 of 9

Advanced Search

Notify me via email or RSS

ScholarsArchive ISSN: 2572-4479

Collections
Disciplines
Scholarly Communication
Additional Collections
Academic Research Blog

Author Corner

Hosted by the.

Harold B. Lee Library

Home | About | FAQ | My Account | Accessibility Statement

Privacy Copyright

Home > USC Columbia > Engineering and Computing, College of > Mechanical Engineering > Mechanical Engineering Theses and Dissertations

Mechanical Engineering Theses and Dissertations

Theses/dissertations from 2023 2023.

Comprehensive Process Planning Optimization Framework for Automated Fiber Placement , Alex Ryan Brasington

Nondestructive Damage Detection and Stress Corrosion Crack Mitigation in Stainless Steel Plates , Andrew Philip Campbell

GPU-Enabled Genetic Algorithm Optimization and Path Planning of Robotic Arm for Minimizing Energy Consumption , Yichuan Cao

An Artificial Intelligence Approach to Fatigue Crack Length Estimation From Acoustic Emission Signals , Shane T. Ennis

Development of System Pressure Drop Calculation Methods for Dilute Phase Pneumatic Conveying , Ross Daniel Gorman

Leveraging Automated Fiber Placement Computer Aided Process Planning Framework for Defect Validation and Dynamic Layup Strategies , Joshua Allen Halbritter

Spin Mediated Topological Black Hole in Acoustic Metamaterials Near Dirac-Like Cone Frequencies. , Mustahseen Mobashwer Indaleeb

Vision Controlled Autonomous Stakebot for Driving Stakes and Its Digital-Twin , Corey Lee Leydig

Development of Atomistic Machine Learning Approaches for Thermal Properties of Multi-Component Solids and Liquids , Alejandro David Rodriguez

Multidimensional Transport-Coupled Numerical Investigation of Non-premixed Low-Temperature Flame in Atmospheric and High-Pressure Systems , Sudipta Saha

An Autonomous Aerial Drone System for Water Fluorescence Mapping and Targeted Sampling , Kazi Ragib Ishraq Sanim

Timing Deterministic Structural Model Updating Considering Impact and Fatigue Damage , Jason Michael Smith Jr.

Automated Fiber Placement Through Thickness Defect Stacking Optimization , Noah Christopher Swingle

Liquid Cooling System for a High Power, Medium Frequency, and Medium Voltage Isolated Power Converter , Hooman Taghavi

Experimental Observation of Sphere Symmetric Isolated Single Droplet Combustion in a Converging Channel , Mason Carrington Williams

Theses/Dissertations from 2022 2022

Molten Salt Thermal Properties Database – Thermochemical Development and Thermodynamic Assessment of Various Molten Salt Systems , Johnathon Chandler Ard

High-Throughput Computation of Interfacial Thermal Management of Wide-Bandgap Semiconductors , Hao-Wen Chen

On the Influence of Afp-Induced Defects on Mechanical Behavior of Composite Laminates Under Fatigue Loading , Pierre Chevalier

Nondestructive Material Characterization Using a Fully Noncontact Ultrasonic Lamb Wave System for Thin Metals, Nuclear Cladding, and Composite Materials , Elsa Z. Compton

Shear Localization in the Metallic Nanolayered Composites , Shujing Dong

Uncrewed Aircraft Systems for Autonomous Infrastructure Inspection , Michail Kalaitzakis

Fabrication of Asymmetrical Hollow Fiber-Supported Thin Film Membranes, Stack Assembly, and Accelerated Long-Term Stability Test for Oxygen Production From Air , Myongjin Lee

Impacts of Preferential Vaporization of Multi-Component Liquid Fuels on Near-Limit Combustion Behaviors , Seungjae Lim

Fundamental Study of Multiphase Solid/Molten Carbonate Membranes for CO 2 Capture and Conversion , Xin Li

A Hybrid Experimental-Computational Study: Prediction of Flow Fields and Full-Field Pressure Distributions on Three-Tab Asphalt Roofing Shingles Subjected to Hurricane Velocity Winds , Troy A. Myers

Use of DIC Measurements With Finite Element Models For Direct Heterogeneous Material Property Determination and Wrinkle Formation During Automated Fiber Placement , Sreehari Rajan Kattil

Experimental Investigations of Yarn Pull-Out Behavior in Kevlar®: Influence of Applied Metallic Coatings and Effect of Dynamic Loading , Julie Ann Roark

Hybrid Theory-Machine Learning Methods for the Prediction of AFP Layup Quality , Christopher M. Sacco

Characterization of Nonequilibrium Plasma Discharge in High Water Vapor Concentration , Malik Mohammad Tahiyat

Advancement of New Solid-Oxide Iron-Air Battery (SOIAB) Operated on High-Temperature Oxide-Ion Chemistry , Qiming Tang

Towards Modeling of Induction Welding of Thermoplastic Laminates With a Mixed Finite Element Boundary Element Approach , Florentius Johannes van Zanten

Theses/Dissertations from 2021 2021

Experimental Investigation of Spray Cooling Integrated With a Modified Vapor Compression Refrigeration System Using Several Refrigerants , Nabeel Mukhlif Abdulrazzaq

Nano-Engineered High-Performance Copper-Water Heat Pipes , Ahmed A. Abdulshaheed

Anisotropic Wave Behavior in Isotropic Material With Orthogonal Surface Perturbation , Khaleda Akter

Preferential Vaporization Potential of Crude Oils and its Impact on Flame Flashback Behaviors , Ayuob Al wahaibi

Reduced Order Modeling Based on Hybrid Snapshot Simulation , Feng Bai

Leveraging Digital Transformation to Build the Technology Of Tomorrow Using Yesterday’s Equipment , Evan Barnett

A Multi Physics Integrated Solution for a High-pressure Stage Turbine Efficiency and Durability , Sanjay Chopra

Mechanical Strength of Sic Composite Tubing Under Uniaxial and Multiaxial Loading , Colton Corley

Purification of Uranium Tetrafluoride Using Ammonium Bifluoride , Kyle Robert Foster

Fabrication and Characterization of Micro/Nanostructured Ceramic Device for Energy Conversion , Yun Gan

An Acoustic Emission and Artificial Intelligence Approach to Structural Health Monitoring for Aerospace Application , Joseph Chandler Garrett

Optimizing Heat Pipes With Partially-Hybrid Mesh-Groove Wicking Structures and Its Capillary-Flowing Analysis by Simulation , Guanghan Huang

Nondestructive Evaluation and Structural Health Monitoring of Manufacturing Flaws and Operational Damage in Composite Structures , Robin James

Prediction of Residual Stress and Distortion in Laser Powder Bed Fusion Additive Manufacturing , Bhanuprakash Sairam Kosaraju

Instrumentation and Experimentation Development for Robotic Systems , Tristan Kyzer

Enhanced Flow Boiling and Bubble Dynamics with HFE7100 & DI Water in Interconnected Microchannels , Jiaxuan Ma

Development of Acoustic Metamaterial Noise Barriers and Simultaneously Harvesting Energy Using Smart Materials , Fariha Mir

Development of a Rapid Compression and Expansion Machine To Characterize the Ignition Propensity of Multi-Component Liquid Fuels , Jonathan Joseph Morreale

Searching Extreme Mechanical Properties Using Active Machine Learning and Density Functional Theory , Joshua Ojih

Effect of Crystal Size on the Failure Mechanics Of Polymer Bonded Explosives , Chizoba Onwuka

Experimental Investigation of Single and Two-Phase Heat Transfer Performance in Microchannels with Surface Modifications and Multiple Inlet Restrictors , Saad Kadham Oudah

Separate Effects Tests for Studying Thermal Gradient Driven Cracking in UO 2 Pellets Undergoing Resistive Heating , Sobhan Patnaik

Effects of Overmolding Process Parameters on Bondzone Quality , Vivek Varma Penumetsa

An Investigation of the Ignition Propensities of Fuels Perturbed by Nitrogen Monoxide , Ackmer Robinson III

Multimodal Robotic Health in Future Factories Through IIot, Data Analytics, and Virtual Commissioning , Clint Saidy

Grafting Based Thermoplastic-Thermoset Bonding for Aerospace Structures , Saurabh Vaidya

Simulation-Based and Data-Driven Approaches to Industrial Digital Twinning Towards Autonomous Smart Manufacturing Systems , Kaishu Xia

Multi-Fidelity Surrogate and Reduced-Order Model-Based Microfluidic Concentration Gradient Generator Design , Haizhou Yang

Implementation of Stereo Digital Image Correlation for In-Plane Strain Measurements to Quantify the Anisotropic Behavior, Plastic Flow, and Strain Hardening of Extruded Aluminum Alloy , Farzana Yasmeen

Application of Digital Transformation in the Water Desalination Industry to Develop Smart Desalination Plants , Ibrahim Yousif

Theses/Dissertations from 2020 2020

Fundamental Understanding of Plasma Discharge Formation in Liquid and Multiphase Configurations Through Multiphysics Modeling , Ali Charchi Aghdam

Acoustic and Ultrasonic Beam Focusing Through Aberrative and Attenuative Layers , Hossain Ahmed

Kinetic and Multidimensional Transport Coupled Numerical Investigation of Nox Formation During Syngas and Natural Gas Combustion , Sheikh Farhan Ahmed

Efficient Design Optimization Methodology for Manufacturable Variable Stiffness Laminated Composite Structures , Mazen Albazzan

Design and Testing of a Supercritical Carbon Dioxide Plasma Reactor , Gregory Belk

Artificial Intelligence Approaches for Structural Health Monitoring of Aerospace Structures , Kimberly A. Cardillo

Autonomous Drone-Based Sensor Package Deployment to the Underside of Structures , Sabrina Rose Carroll

Development of a CFD Model for the Drying of Aluminum-clad Spent Nuclear Fuel , Nathaniel Cooper

Local Eigenvalue Modification Procedure for Real-Time Model Updating of Structures Experiencing High-Rate Dynamic Events , Claire Rae Drnek

Damage Evaluation of Rolling Element Bearings for Shipboard Machinery , Brenna Lyn Feirer

Automation of Process Planning for Automated Fiber Placement , Joshua A. Halbritter

Acoustic Emission and Guided Wave Modeling and Experiments for Structural Health Monitoring and Non-Destructive Evaluation , Roshan Prakash Joseph

Lamb Wave Nondestructive Evaluation and Imaging on Plate-Like Structures , Zhaoyun Ma

Guided-Wave SHM and NDE of Composite Structures: Modeling and Experiments , Hanfei Mei

Effects of Material Characteristics and Equipment Configuration on Profilometry Scanning Results for Error Mitigation in Automated Fiber Placement , Jacob Ondeck

Steady-State and Transient Study of Flow Boiling in Microchannels With Microgrooves/Micronozzles , Congcong Ren

Strain Components in Friction Stir Extrusion , Megan Ryan

Design of Bio-Inspired Multifrequency Acoustic Sensors and Metamaterial Energy Harvesting Smart Structures , Mohammadsadegh Saadatzi

Influence of Dynamic Multiaxial Transverse Loading on Ultrahigh Molecular Weight Polyethylene Single Fiber Failure , Frank David Thomas

The Manufacturing and Characterization of Pseudo-Woven Carbon Fiber Composite Architectures for Enhanced Damage Tolerance , Cyrus Vakili Rad

Tow-Path Characterization for Automated Fiber Placement , Roudy Wehbe

Exploration and Evaluation of Novel Cathode Materials for Intermediate-to-Low Temperature Solid Oxide Fuel Cells , Chunyang Yang

Enhancing Single and Two-Phase Heat Transfer of Microgap Heat Sinks Using Nano-Structure Coatings , Yueyang Zhao

Theses/Dissertations from 2019 2019

A Model for Condensation Heat Transfer in Hydrophobic-Hydrophilic Surfaces , Abdulwahab E. Alhashem

3D Topology Optimization of Spatially Reinforced Composites , Luis G. Bahamonde Jácome

Impact of Cycloalkanes on Ignition Propensity Measured as Derived Cetane Number in Multi-Component Surrogate Mixtures , Dalton Odell Carpenter

Study of Wire Arc Additive Manufacturing With Aluminum Alloy 2219 , Sritam Kumar Dash

Development of Scalable and Tunable Super- Hydrophilic and - Hydrophobic Coatings on the CU Substrate for Phase Change Heat Transfer Applications , Raikan Saad Dawas

Using a Nondispersive Wave Propagation for Measuring Dynamic Fracture Initiation Toughness of Materials: Experimental and Numerical Based Study , Ali Fahad Fahem

Friction Stir Additive Manufacturing(FSAM) of 2050 Al-Cu-Li Alloy , Ilana Lu

Mechanical Characterization and Non-Destructive Evaluation of SiC f /SiC m Composites for Nuclear Applications , Donald J. McCleeary

Structural Health Monitoring and Non-Destructive Inspection of Composite and Metallic Structures , Asaad Qasim Migot

Acoustoelastic Metamaterial with Simultaneous Noise Filtering and Energy Harvesting Capability from Ambient Vibrations , Fariha Mir

Surrogate Formulation Based on Chemical Functional Group Analysis , Stuart Nates

Continuous Tow Path Generation for Constant and Variable Stiffness Composite Laminates on Single and Double Curved Surfaces , Caleb R. Pupo

Numerical Analysis on Convective Cooling Augmented by Evaporative Heat and Mass Transfer for Thermal Power Plant Application , Sudipta Saha

Enhanced Heat Transfer in Spray Cooling Through Surface Modifications: An Experimental and Computational Study , Azzam Saadi Salman

Plasma Surface Functionalization of AFP Manufactured Composites for Improved Adhesive Bond Performance , Ibrahim Sarikaya

Computational Wave Field Modeling in Anisotropic Media , Sajan Shrestha

Advanced Search

Notify me via email or RSS
Collections
Disciplines

Submissions

University Libraries

Home | About | FAQ | My Account | Accessibility Statement

Privacy Copyright

Thesis Topics That Will Shape the Future of Mechanical Engineering

Mechanical Engineering

Mechanical engineering is on the brink of exciting changes, with new research that’s going to change the way industries work and what technology can do. Thesis topics in this field are more than just school projects; they’re the plans for the next big steps forward that will make mechanical engineering better and more effective.

For example, topics like advanced robotics and automation are going to make manufacturing and services a lot smarter and more efficient. Sustainable energy technologies are key to building a future that’s not just high-tech but also eco-friendly. Exploring smart materials and tiny technologies, like nanotech, will make products last longer and work better.

In the medical world, studying how the body moves and creating artificial limbs are leading to huge improvements in healthcare. Also, new ways of making things, like 3D printing, are completely changing how we think about production.

All of these areas show that mechanical engineers are really focused on inventing new things and that the field is always moving and changing.

Advanced Robotics and Automation

In the field of mechanical engineering, choosing advanced robotics and automation as a topic for a thesis is very important because it can change the way things are made, how we take care of our health, and how we provide services. Robots are becoming a big deal because they can make work faster, more accurate, and help create intelligent factories, which is a big part of the future of industry, known as Industry 4.0.

Researchers are focusing on making new algorithms to give robots more independence, improving how robots sense and understand their surroundings, and making it easier for people and robots to work together. Mechanical engineers play a crucial role as they work out the complex details of how robots move and are controlled. Their hard work helps overcome challenges that currently exist, leading to major improvements in how well and reliably different industries operate.

For example, in a car manufacturing plant, mechanical engineers might develop a new algorithm that allows robots to identify and fix a defect in a car part on their own, without human help. This could mean cars are made with fewer errors and the production line keeps moving quickly.

Another case could be in a hospital where robots are used to deliver medication. Engineers could improve the sensors on these robots so they can navigate crowded hallways safely and quickly, ensuring patients get their treatments on time. These advancements show why this topic is not just about building robots but about making every industry work better.

Sustainable Energy Technologies

Mechanical engineers who have been working with advanced robots and machines are now turning their attention to creating better ways to use energy that don’t harm the environment. This is really important because the world needs cleaner and more efficient energy sources.

Engineers are working on making things like solar panels, wind turbines, and batteries better. For example, they’re trying to make solar panels more effective by using tiny materials called nanomaterials, and they’re figuring out how to make wind turbines work better with the air around them. They’re also improving batteries, like the ones that use lithium, and looking into using hydrogen as a fuel.

All this research is not just about making things that work well but also making sure they don’t cost too much, so everyone can use them. It’s a big task for these engineers to create solutions that are both smart and practical.

Smart Materials and Nanotechnology

Mechanical engineers are working with smart materials and nanotechnology to create cutting-edge devices and systems. They’re making materials that can change their own properties when the environment around them changes. To do this well, they need a deep knowledge of materials, mechanics, and very small-scale events.

Their work brings together ideas from physics, chemistry, and biology. They face challenges like making these tiny materials and predicting how they’ll act when they’re used.

If they succeed, we could see big improvements in things like medical devices and airplanes, where controlling material properties is very important.

Biomechanics and Prosthetics Design

Advancements in the field of biomechanics and prosthetic design are changing the game for mechanical engineering, with big benefits for people’s ability to move and function. This exciting area is growing thanks to a blend of cutting-edge computer simulations, new materials, and smart sensors.

Experts are working on how to predict and replicate the way muscles and bones work together, aiming to create artificial limbs that move just like real ones. They’re thinking hard about how to make materials that work well with the human body, save energy, and can handle all kinds of physical activity.

One of the biggest technical hurdles is figuring out how to make prosthetic limbs work smoothly with the nervous system, so that users can control them easily and naturally. Meeting these goals could hugely improve life for people who’ve lost limbs or have trouble moving around.

In simpler terms, scientists and engineers are making leaps in designing artificial limbs that feel and act like real ones. They use powerful computer programs, study new materials, and use sensors to make this happen. Their goal is to produce prosthetics that not only fit the body well but are also energy-efficient and versatile for different sports or activities.

The big challenge is to connect these artificial limbs to the body’s nerves, which would let people control them by thought. This work is incredibly important because it can help people who have lost limbs or can’t move well to live better, more active lives.

Additive Manufacturing and 3D Printing

3D printing, or additive manufacturing, is changing how we make things by building them up layer by layer. This new way of making things is important because it lets us create complex shapes that we couldn’t make before with traditional methods that take material away. For people who work in mechanical engineering, this is a big deal. It means they can use new materials, make structures stronger and more efficient, and waste less material.

When people study 3D printing, they might look into how heat affects the layers as they’re added, the strength of the materials made this way, or come up with new ways to print things. Real-world tests could also check out the limits of 3D printing, like if the printed objects are weaker in one direction or if the printers we have now can’t do everything we want them to do. Each of these areas could lead to better ways to design, make prototypes, and even mass-produce items.

Let’s take the example of a bike helmet. Traditionally, helmets are made in several parts and then put together, which can leave weak spots. With 3D printing, a helmet could be made in one piece with a lattice structure that’s not only stronger but also lighter. Plus, since we’re only using the material we need for the helmet, there’s less waste.

In a nutshell, 3D printing has the power to change how we create things, from small gadgets to parts for airplanes, making them better and more environmentally friendly.

In summary, the thesis topics I’ve mentioned are key areas where mechanical engineering is set to make big strides. These topics are important because they tackle current challenges.

For example, combining robotics with automation could revolutionize how we work, while developing new sustainable energy solutions is crucial for our planet’s health.

Looking into smart materials and how the human body moves (biomechanics) can lead to breakthroughs in both industry and medicine.

Also, the improvement of 3D printing (additive manufacturing) has the potential to transform how we make things, making production more efficient and environmentally friendly.

These research areas are not just exciting; they’re essential for progress in various fields like manufacturing, healthcare, and eco-friendly practices.

The Crossroads of Mechanical and Robotics Engineering

Mathematical Foundations for Mechanical Engineering

Entry Requirements for Mechanical Engineering

Pursuing an Online Mechanical Engineering Degree in the UK

Navigating Through Mechanical Engineering Degree Programs

Aerospace Meets Mechanical Engineering at UofA

[100+] Mechanical Engineering Research Topics For College Students With Free [Thesis Pdf] 2022

Are You Searching Research Topics For Mechanical Engineering , Topics For Mechanical Engineering Research Paper, Mechanical Engineering Research Topics For Students, Research Topics Ideas For Mechanical Engineering, Mechanical Engineering Research Topics For Phd, Mechanical Engineering Phd Topics. So You are at right place. At this website you can get lots of Mechanical Engineering Research Topics for College Students, Phd, Mphil, Dissertations, Thesis, Project, Presentation, Seminar or Workshop.

In this article we provide you latest research topics for Mechanical Engineering with full Phd thesis. By these research topics for Mechanical Engineering you can get idea for your research work. Check the suggestions below that can help you choose the right research topics for Mechanical Engineering : You can also Free Download Cyber Crime Research Phd Thesis in Pdf by given link.

Now Check 50+ Mechanical Engineering Research Topics List

Table of Contents

Research Topic For Mechanical Engineering 2023

Mechanical engineering research topics for dissertation, research topics ideas for mechanical engineering, mechanical engineering research topics ideas for college students, topics for mechanical engineering research paper, mechanical engineering research topics for thesis, mechanical engineering research topics for students, mechanical engineering research topics for undergraduate students, mechanical engineering research topics for university students, mechanical engineering research topics for phd, research topics for phd in mechanical engineering, research topics for mphil mechanical engineering, mechanical engineering phd topics, research paper topics for mechanical engineering, mechanical engineering research paper topics, phd thesis topic for mechanical engineering, research topics for mechanical engineering subject, mechanical engineering research topics for fisheries, research topics for mechanical engineering, mechanical engineering research topics examples.

Note: All Research Work Idea on this website is inspired by Shodhganga: a reservoir of Indian Theses. We provide you mostly research work under Creative Commons Licence. Credit goes to https://shodhganga.inflibnet.ac.in/

If you find any copyright content on this website and you have any objection than plz immediately connect us on [email protected]. We Will remove that content as soon as.

This Post is also helpful for: Mechanical Engineering Thesis Pdf, Mechanical Engineering Thesis Topics, Mechanical Engineering Dissertation Topics, Mechanical Engineering Thesis, Catchy Title For Mechanical Engineering, Phd Thesis Topic for Mechanical Engineering, Mechanical Engineering Research Paper Topics, Mechanical Engineering Phd Topics, Mechanical Engineering Research Topics, Mechanical Engineering Research Topics For College Students

ODU Digital Commons

Home > Engineering & Technology > MAE > ETDs

Mechanical & Aerospace Engineering Theses & Dissertations

Theses and dissertations published by graduate students in the Department of Mechanical and Aerospace Engineering, College of Engineering, Old Dominion University since Fall 2016 are available in this collection. Backfiles of all dissertations (and some theses) have also been added.

In late Fall 2023 or Spring 2024, all theses will be digitized and available here. In the meantime, consult the Library Catalog to find older items in print.

Theses/Dissertations from 2023 2023

Thesis: Switching Methods for Three-Dimensional Rotational Dynamics Using Modified Rodrigues Parameters , Matthew Jarrett Banks

Dissertation: Studies of Flowfields and Dynamic Stability Characteristics of a Quadrotor , Engin Baris

Thesis: Development, Experimental Validation, and Progressive Failure Modeling of an Ultra-Thin High Stiffness Deployable Composite Boom for in-Space Applications , Jimesh D. Bhagatji

Thesis: Design and Implementation of a Launching Method for Free to Oscillate Dynamic Stability Testing , Kristen M. Carey

Thesis: SeaLion CubeSat Mission Architecture Using Model Based Systems Engineering with a Docs as Code Approach , Kevin Yi-Tzu Chiu

Dissertation: RoboRetrieve --In a Dual Role as a Hand-held Surgical Robot and a Collaborative Robot End-effector to Perform Spillage-free Specimen Retrieval in Laparoscopy , Siqin Dong

Thesis: Fabrication of Solid Oxide Fuel Cell Components Using Stereolithography 3D Printing , Hannah Dyer

Thesis: Fusion Bonding Behavior of 3D Printed PA6/CF Composites Via Post Fabrication Compaction , Gonzalo Fernandez Mediavilla

Dissertation: Machine Learning Approach to Activity Categorization in Young Adults Using Biomechanical Metrics , Nathan Q. C. Holland

Thesis: Study of Microphonic Effects on the C100 Cryomodule for High Energy Electron Beam Accelerators , Caleb James Hull

Dissertation: E-Cadherin Force Transmission and Stiffness Sensing , Mazen Mezher

Thesis: Experimental and Computational Aerodynamic Studies of Axially-Oriented Low-Fineness-Ratio Cylinders , Forrest Miller

Thesis: The Effect of Through Thickness Reinforcement Angle on the Disbonding Behavior in Skin-Stringer Configuration , Christopher John Morris

Dissertation: Chemical and Physical Interaction Mechanisms and Multifunctional Properties of Plant Based Graphene in Carbon Fiber Epoxy Composites , Daniel W. Mulqueen

Thesis: Data-Driven Predictive Modeling to Enhance Search Efficiency of Glowworm-Inspired Robotic Swarms in Multiple Emission Source Localization Tasks , Payal Nandi

Dissertation: Fabrication of Smooth SAC305 Thin Films via Magnetron Sputtering and Evaluations of Microstructure, Creep, and Electrical Resistivity , Manish Ojha

Dissertation: Faster, Cheaper, and Better CFD: A Case for Machine Learning to Augment Reynolds-Averaged Navier-Stokes , John Peter Romano II

Thesis: A Comparative Study of Vinti-Based Orbit Propagation and Estimation for CubeSats in Very Low Earth Orbits , Ethan Michael Senecal

Theses/Dissertations from 2022 2022

Thesis: A Comparison of Uniaxial Compressive Response and Inelastic Deformation Mechanisms in Freeze Cast Alumina-Epoxy Composites Without and With Rigid Confinement , Tareq Aljuhari

Thesis: Failure Mode, Effects and Criticality Analysis of a Very Low Earth Orbit CubeSat Mission , Robb Christopher Borowicz

Thesis: A Study of Asymmetric Supersonic Wind Tunnel Nozzle Design , Brittany A. Davis

Thesis: Electromagnetic Modeling of a Wind Tunnel Magnetic Suspension and Balance System , Desiree Driver

Dissertation: Advanced Generalized Predictive Control and Its Application to Tiltrotor Aircraft for Stability Augmentation and Vibration Reduction , Thomas Glen Ivanco

Dissertation: Numerical Simulation of Electroosmotic Flow of Viscoelastic Fluid in Microchannel , Jianyu Ji

Thesis: Assembly of Ceramic Particles in Aqueous Suspensions Induced by High-Frequency AC Electric Field , James E. John IV

Dissertation: The Effect of Soft Tissue and Bone Morphology on the Stresses in the Foot and Ankle , Jinhyuk Kim

Thesis: Development of Modeling and Simulation Platform for Path-Planning and Control of Autonomous Underwater Vehicles in Three-Dimensional Spaces , Sai Krishna Abhiram Kondapalli

Thesis: Deep Learning Object-Based Detection of Manufacturing Defects in X-ray Inspection Imaging , Juan C. Parducci

Dissertation: Utilization of Finite Element Analysis Techniques for Adolescent Idiopathic Scoliosis Surgical Planning , Michael A. Polanco

Thesis: Mechanics of Preimpregnated Fiber Tow Deposition and Compaction , Virginia Meredith Rauch

Dissertation: Role of Structural Hierarchy in Multiscale Material Systems , Siavash Sattar

Thesis: Implementation of an Extended Kalman Filter Using Inertial Sensor Data for UAVs During GPS Denied Applications , Sky Seliquini

Dissertation: Collaborative Robotics Strategies for Handling Non-Repetitive Micro-Drilling Tasks Characterized by Low Structural Mechanical Impedance , Xiangyu Wang

Theses/Dissertations from 2021 2021

Dissertation: Tunable Compressive Mechanical Behavior of Ice-Templated Materials , Sashanka Akurati

Thesis: Analysis of a Non-Equilibrium Vortex Pair as Aircraft Trailing Vortices , Manuel Ayala

Thesis: Modeling Interactions in Concentrated Ceramic Suspensions Under AC Electric Field , Naga Bharath Gundrati

Dissertation: Improved Strain Gage Instrumentation Strategies for Rotorcraft Blade Measurements , Timothy S. Davis

Thesis: A Model-Based Systems Engineering Approach to e-VTOL Aircraft and Airspace Infrastructure Design for Urban Air Mobility , Heidi Selina Glaudel

Dissertation: Development and Applications of Adjoint-Based Aerodynamic and Aeroacoustic Multidisciplinary Optimization for Rotorcraft , Ramiz Omur Icke

Thesis: A New Method for Estimating the Physical Characteristics of Martian Dust Devils , Shelly Cahoon Mann

Thesis: Post-Processing and Characterization of Additive Manufactured Carbon Fiber Reinforced Semi-Crystalline Polymers , Patricia Revolinsky

Thesis: Gradient-Based Tradeoff Design for Engineering Applications , Lena Alexis Royster

Thesis: The Effect of Through Thickness Reinforcement on Debonding Behavior of Skin/Stringer Configuration , Yogaraja Sridhar

Thesis: Empirical Modeling of Tilt-Rotor Aerodynamic Performance , Michael C. Stratton

Thesis: A Digital One Degree of Freedom Model of an Electromagnetic Position Sensor , Michelle Elizabeth Weinmann

Theses/Dissertations from 2020 2020

Thesis: Parametric Study of Residual Stresses in Wire and Arc Additive Manufactured Parts , Hisham Khaled Jamil Abusalma

Thesis: The Effect of Compaction Temperature and Pressure on Mechanical Properties of 3D Printed Short Glass Fiber Composites , Pushpashree Jain Ajith Kumar Jain

Thesis: Numerical Analysis of a Roadway Piezoelectric Harvesting System , Abdul Rahman Badawi

Dissertation: Role of Anisometric Particles in Ice-Templated Porous Ceramic Structure and Mechanical Properties , Mahesh Banda

Thesis: Mechanism of Compaction With Wrinkle Formation During Automatic Stitching of Dry Fabrics and the Size Effect of Compression Molded Discontinuous Fiber-Reinforced Composites , Anibal Benjamin Beltran Laredo

Thesis: Conical Orbital Mechanics: A Rework of Classic Orbit Transfer Mechanics , Cian Anthony Branco

Thesis: Rotorcraft Blade Angle Calibration Methods , Brian David Calvert Jr.

Dissertation: Onboard Autonomous Controllability Assessment for Fixed Wing sUAVs , Brian Edward Duvall

Thesis: A Parametric Analysis of a Turbofan Engine with an Auxiliary Bypass Combustion Chamber – The TurboAux Engine , Kaleab Fetahi

Thesis: Space-Based Countermeasure for Hypersonic Glide Vehicle , Robert Joseph Fowler IV

Thesis: Compaction and Residual Stress Modeling in Composite Manufactured with Automated Fiber Placement , Von Clyde Jamora

Thesis: Trajectory Simulation With Battery Modeling for Electric Powered Unmanned Aerial Vehicles , Ege Konuk

Thesis: Detailed Modeling of the Flash Hydrolysis of Algae for Biofuel-Production in COMSOL Multiphysics , Noah Joseph LeGrand

Thesis: Through-Thickness Reinforcement and Repair of Carbon Fiber Based Honeycomb Structures Under Flexure and Tension of Adhesively Bonded Joints , Aleric Alden Sanders

Thesis: Energy Harvesting Using Flextensional Piezoelectric Energy Harvesters in Resonance and Off-Resonance Modes , Mohamed A. Shabara

Thesis: Thermal Contact Resistance Measurement and Related Uncertainties , Amanda Elizabeth Stark

Thesis: Model Based Systems Engineering for a Venture Class Launch Facility , Walter McGee Taraila

Thesis: A Post-Impact Behavior of Platelet-Based Composites Produced by Compression Molding , Christopher Eugene Ervin Volle

Thesis: Nonlinearity Index Aircraft Spin Motion Analysis With Dynamic Inversion Spin Recovery Controller Design , Jeffry Walker

Thesis: A Study of the Aeroacoustics of Swept Propellers for Small Unmanned Aerial Vehicles , Arthur David Wiedemann

Thesis: Finite Element Analysis Investigation of Hybrid Thin-Ply Composites for Improved Performance of Aerospace Structures , Alana M. Zahn

Theses/Dissertations from 2019 2019

Thesis: Characterization and Optimization of a Propeller Test Stand , Colin Bruce Leighton Benjamin

Dissertation: Endogenous Force Transmission Between Epithelial Cells and a Role for α-Catenin , Sandeep Dumbali

Dissertation: Effect of the Physical Micro-Environment on Cell Adhesion and Force Exertion , Mohamad Eftekharjoo

Thesis: Reducing the Noise Impact of Unmanned Aerial Vehicles by Flight Control System Augmentation , Matthew B. Galles

Thesis: Design and Manufacture of an Inertial Cascade Impactor for Industrial Hygiene Purposes , Hector Joel Gortaire

Thesis: Off Axis Compressive Response of Ice-Templated Ceramics , Rahul Kumar Jujjavarapu

Thesis: Unsupervised-Learning Assisted Artificial Neural Network for Optimization , Varun Kote

Dissertation: Numerical Simulation of Viscoelastic Flow in Micro/Nanochannels , Lanju Mei

Thesis: Comparison of Support Methods for Static Aerodynamic Testing and Validation of a Magnetic Suspension and Balance System , Cameron K. Neill

Thesis: Extension of a Penalty Method for Numerically Solving Constrained Multibody Dynamic Problems , Troy Newhart

Dissertation: Computational Analysis and Design Optimization of Convective PCR Devices , Jung Il Shu

Thesis: Periodic Orbit Analytic Construction In The Circular Restricted Three-Body Problem , Jay Shriram Suryawanshi

Thesis: A CFD Study of Steady Fully Developed Laminar Flow Through a 90-Degree Bend Pipe with a Square Cross-Sectional Area , Subodh Sushant Toraskar

Dissertation: Estimation of Arterial Wall Parameters Via Model-Based Analysis of Noninvasively Measured Arterial Pulse Signals , Dan Wang

Theses/Dissertations from 2018 2018

Thesis: Offshore Wind Energy: Simulating Local Offshore Wind Turbine , Ian P. Aquino

Dissertation: Epithelial Sheet Response to External Stimuli , Yashar Bashirzadeh

Thesis: Anthropomorphically Inspired Design of a Tendon-Driven Robotic Prosthesis for Hand Impairments , Manali Bapurao Bhadugale

Thesis: Aerothermodynamic Analysis of a Mars Sample Return Earth-Entry Vehicle , Daniel A. Boyd

Thesis: Volterra Series Approximation for Multi-Degree of Freedom, Multi-Input, Multi-Output, Aircraft Dynamics , Alexander J. Chen

Dissertation: Simplified, Alternative Formulation of Numerical Simulation of Proton Exchange Membrane Fuel Cell , Russell L. Edwards

Thesis: Distributed Sensing and System Identification of Cantilever Beams and Plates in the Presence of Weak Nonlinearities , Patrick Sean Heaney

Thesis: Dynamic Response Modeling of High Speed Planing Craft with Enforced Acceleration , Brian K. Johnson

Dissertation: Identification and Optimal Linear Tracking Control of ODU Autonomous Surface Vehicle , Nadeem Khan

Dissertation: Design and Implementation of an Artificial Neural Network Controller for Quadrotor Flight in Confined Environment , Ahmed Mekky

Thesis: Gust Alleviation System for General Aviation Aircraft , Lucas Coleman Mills

Thesis: Human-Robot Collaborative Force-Controlled Micro-Drilling for Advanced Manufacturing and Medical Applications , Parimal Mahesh Prajapati

Thesis: Single-Stage, Venturi-Driven Desalination System , Brandon Proetto

Thesis: A Cost Effective Design for a Propeller Thrust/Torque Balance , Nicholas Barrett Sadowski

Dissertation: Understanding the Mechanical Behavior of Costal Cartilage at Their Curved Exterior Surface Via a Tactile Sensor with a Built-In Probe for Distributed-Deflection Detection , Jiayue Shen

Thesis: A Scientific Approach to Understanding the Head Trauma Endured by a Mixed Martial Arts Fighter , John William Michael Sorbello

Thesis: Robocatch: Design and Making of a Hand-Held Spillage-Free Specimen Retrieval Robot for Laparoscopic Surgery , Farid Tavakkolmoghaddam

Thesis: Effects of Automated Fiber Placement on High Strain Rate Compressive Response of Advanced Composites , Alexander Trochez

Thesis: A Monolithic Internal Strain-Gage Balance Design Based on Design for Manufacturability , Thomas Ladson Webb III

Dissertation: A Stepwise Compression-Relaxation Testing Method for Tissue Characterization and Tumor Detection Via a Two-Dimensional Tactile Sensor , Yichao Yang

Advanced Search

Notify me via email or RSS
Collections
Disciplines
Author Guidelines
MAE Website
Other Digital Collections
ODU Libraries
Old Dominion University

Home | About | FAQ | My Account | Accessibility Statement

Privacy Copyright

Home > ETD > Mechanical Engineering > ETDM_MECHENG

Mechanical Engineering Master's Theses

Theses/dissertations from 2023 2023.

Development of a finite element analysis model for fatigue crack propagation of energy storage flywheel rotors , Ailene B. Nuñez

An application of multi-criteria decision Analysis Methods in the Design of Alternative-Fueled Vehicle Systems for Different Transportation Sectors in the Philippines , Jaime Alonzo M. Poblete

Theses/Dissertations from 2022 2022

Analyzing the impact of EV charging to the power grid with emphasis on behavioral factors and charging infrastructure availability , Adrian A. Allana

Scenario analysis of policies supporting electric jeepney adoption using hybrid agent-based system dynamics model , Jeun Rei Benitez Barlis

Detection of cloudy spot defects on PET preforms using machine learning , Isabelle D. Co

Interfacial delamination analysis on fan-out wafer-level package using finite element method , Ariel P. Conversion

Spatiotemporal modeling of electric vehicle charging demand for strategic EV charger deployment in Metro Manila , Edwin Bernard F. Lisaba Jr.

Finite element analysis of active metal braised semiconductor package for warpage reduction , Roberto Louis P. Moran

A study on microalgal biorefinery system with use phase uncertainty and allocation analysis , Earle Anderson Sy Ng

Evaluation of the effects of electric vehicle battery cells layout and conductive sheet fins thickness to battery cooling using transportation micro-simulation modeling and finite element steady-state thermal analysis , Joshua Ezekiel Dimaunahan Rito

Spatial investigation of energy equity with consideration of the renewable energy transition , Christian Roice Tayag

Theses/Dissertations from 2021 2021

Swarm object transportation through phase transitions , Joseph Aldrin T. Chua

BEM theory analysis of a small biomimetic HAWT , Von Eric A. Damirez

Development of a life cycle assessment for chemical looping combustion , John Patrick D. Mercado

Multi-country analysis of driving factors to carbon emission using LMDI decomposition analysis method and rough set modeling , Mouy Meta

Multi-country analysis of driving factors to carbon emissions using LMDI decomposition analysis method and rough set modeling , Meta Mouy

Theses/Dissertations from 2020 2020

Quadrotor drone manipulation using neuro fuzzy algorithm with non-invasive brain-computer interface , Timothy Scott C. Chu

Theses/Dissertations from 2019 2019

Prediction and optimization models for integrated renewable-storage energy systems in mixed-use buildings , Aaron Jules R. Del Rosario

Development of a UAV with hand gesture recognition using deep learning , Calvin Alexander Y. Ng

Configuration enhancement for the flight endurance of a separate-lift-and-thrust hybrid unmanned aerial vehicle using Gaussian process optimization , Francis Gregory L. Ng

Theses/Dissertations from 2018 2018

Cooling load calculation and AHU equipment selection for a nutritional dry blend facility , John Paul Christian L. Benosa

Design criteria assessment for ball grid array semiconductor packaging based on thermomechanical simulation and crack analysis , Niño Rigo Emil G. Lim

Development of a predictive aeration strategy for microalgae cultivation in photobioreactors , Jeremy Jay B. Magdaong

Assessing energy security cost of the transport sector , Jimwell L. Soliman

Fabrication and characterization of lead tin telluride (Pb1-x SnxTe) thermoelectric nanomaterial using horizontal vapor phase growth technique (HVPG) , Sam Sopheap

Theses/Dissertations from 2017 2017

Bilevel fuzzy optimization model of an algae-based eco-industrial park under cooperative game theory , Kyle Darryl T. Aguilar

A fuzzy-genetic robust optimization framework for UAV conceptual design , Lemuel F. Banal

Performance analyses of low Reynolds number airfoils for small-scale horizontal axis wind turbines , John Christian T. Chua

An evaluation methodology with applied life-cycle assessment of coal-biomass cofiring in Philippine context , Dan William C. Martinez

Hydrodynamic investigation and characterization of a photo-bioreactor for microalgae cultivation , Andres Philip Mayol

Computational fluid dynamics analysis on the performance of the new design of savonius wind turbine for urban wind energy exploitation systems , San Rathana

A vacuum drying characterization and optimization of spirulina sp. using definitive screening design of experiment , Christian Joseph C. Ronquillo

Development of supply chain based fuel cycle inventory model for the Philippines , Alexis Mervin T. Sy

Optimization of one-part geopolymer based on fly ash and volcanic ash for soil stabilization , April Anne S. Tigue

Theses/Dissertations from 2016 2016

Performance, emission and net energy analysis of a diesel genset using producer gas from jatropha press-cake in dual fuel miode , Nechoh A. Arbon

Optimization of in situ transesterification of wet microalgae chlorella vulgaris under subcritical conditions , Charles B. Felix

Regional feasibility analysis of wind and solar renewable technologies in the Philippines using analytic hierarchy process (AHP) , Neil Stephen A. Lopez

Theses/Dissertations from 2015 2015

Development of gas leak detection system using fuzzy logic, optical flow and neural networks , Edgar Carrillo II

Synthesis and characterization of silver-titanium dioxide nanomaterials via horizontal vapor phase growth (HVPG) technique for antibacterial applications , Muhammad Akhsin Muflikhun

Combustion effect of jatropha producer gas fumigation in a stationary diesel genset , Monorom Rith

Theses/Dissertations from 2014 2014

Investigation of the effects of a blade profile geometry in a hinged blade cross axis turbine , Arvin H. Fernando

Design of a fuzzy GS-PID controller for payload drops of varying mass for a quadrotor , Ivan Henderson V. Gue

Energy audit of St. Joseph Hall and Miguel Hall of De La Salle University , Oswald D. Sapang

Theses/Dissertations from 2013 2013

Experimental evaluation and net energy analysis of methane gas production through anaerobic digestion of jatropha press-cake and pig manure , Jeremias A. Gonzaga

A study on the performance of jatropha press cake-coal cofiring in a fluidized bed combustion system , Maria Flor De Liza F. Jarquio

A molecular study on the effects of osmotic pressure on the lipids of microalgae chlorella vulgaris , Robby B. Manrique

Theses/Dissertations from 2012 2012

Automated bulk cartoning of folded sachet linked strips using constrained gravity stacking , Aaron Dee Bea

Vision based pedestrian detection using histogram of oriented gradients, adaboost, linear support vector machines and optical flow , Samantha Denise Fuentes Hilado

Theses/Dissertations from 2011 2011

Optimization of power train components of electric tricycle based on life cycle cost , Precious L. Alvarez

Research on life-cycle based simulation of the integration of compressed natural gas (CNG) buses in the Philippine transport sector , Lawrence M. Bersales

Energy modeling, fabrication and evaluation of a small-scale natural convection solar dryer for microalgae biofuel production , Neil Stephen A. Lopez

Life Cycle Assessment (LCA) of utilizing rice husk as alternative in Portland clinker production fuel , Daniel Joseph P. Mariano

Theses/Dissertations from 2009 2009

Design and optimization of a propeller type micro-hydro turbine using computational fluid dynamics , Isidro Antonio V. Marfori III

Theses/Dissertations from 2007 2007

A design analysis for small horizontal-axis wind turbine (HAWT) 3-bladed rotor , Byron Michael Codilla Omboy

Theses/Dissertations from 2006 2006

Optimizing the extraction of oil from sugarcane bagasse using thermochemical liquefaction , George Herbert L. Ang

Computer based evaluation of environmental impact of co-generation system of Distileria Bago, Inc. , Rofuat L. Lu

Emergy analysis for materials selection of small hydropower station , Rey L. Rifareal

An energy audit study of manufacturing operations in the Philippines , Yuri Sangala

Theses/Dissertations from 2005 2005

Design, fabrication, and testing of flexible noodle separator in pouch noodle packing , Karlo Roman C. Garcia

An energy audit study of Cavite State University Indang, Cavite , Ronald P. Peña

Theses/Dissertations from 2004 2004

Design and experimental analysis of a combined target fluidic and centrifungal pump system as a tachometer transducer , Lawrence K. Uy

Theses/Dissertations from 2003 2003

Design, fabrication and performance testing of stationary freezer of Jollibee Food Corporation using non-CFC refrigerator (R-404A) , Kenways S. Chee

A study on the co-combustion of rice hull and low-grade coal using a fluidized bed combustion system , Stevan S. Dimaguila

Theses/Dissertations from 2002 2002

Performance curve generation of an unglazed transpired collector system for a fish and crop solar drier , Jose Bienvenido Manuel M. Biona

Spectrally selective visible and solar transmitting heat barrier coating for flat-plate collector , Reynaldo C. Muli

Theses/Dissertations from 2001 2001

Using fuzzy logic in the governing system of a micro-hydro power plant , Laurence A. Gan Lim

Theses/Dissertations from 2000 2000

PC-based retrofitting designed for the automation of a conventional milling machine , Richard Alducente Bayona

Theses/Dissertations from 1998 1998

Occupational health and safety program for the U.S. Metal Industry Company, Inc. , Ronaldo A. Juanatas

Development of a maintenance program for the stamping, drawing, and bending divisions U.S. Metal Industry Co., Inc. , Joselito H. Recio

Occupational health and safety program for the metalcasting technology division of the Metals Industry Research and Development Center , Arnel O. Valdez

Theses/Dissertations from 1997 1997

Bottling line modification project in Bacolod brewery , Maximo A. Merilo

Design and evaluation of a calibration station for liquid types of flowmeters using water as test medium , Roxan De Luna Roxas

Theses/Dissertations from 1994 1994

Design and evaluation of locally-fabricated water-pumping windmill for small-scale irrigation , Pablito O. Anino Sr.

The design of an instrumented charpy impact tester using the deconvolution method , Alvin Y. Chua

Design and evaluation of waste heat recovery refrigeration apparatus , Jimmy Guillena

Computer modeling and simulation of a single cylinder, 4-stroke cycle, gasoline fueled spark ignition engine , Martin Ernesto L. Kalaw

Laboratory-scale combustion of coal-oil mixtures , Gileo Capagngan Sulla

Advanced Search

Notify me via email or RSS
Collections
Disciplines
Colleges and Units

Submissions

Submission Consent Form
Animo Repository Policies
Submit Research
Animo Repository Guide
AnimoSearch
DLSU Libraries
DLSU Website

Home | About | FAQ | My Account | Accessibility Statement

Privacy Copyright

MS in Mechanical Engineering - Thesis Guidelines

Students may choose to pursue a thesis as part of their MS degree program, but only with the consent of a faculty advisor willing to supervise the thesis work.

Preparation of a thesis representing an independent research work is a pivotal phase of this MS degree program. It provides the student with an opportunity to work on an open-ended problem, developing a particular solution that is not pre-determined and involving synthesis of knowledge and intellectual creativity. The thesis may involve an investigation that is fundamental in nature, or may be applied, incorporating theory, experimental testing and/or analytical modeling, and/or creative design. Through the thesis, candidates are expected to give evidence of competence in research and a sound understanding of the area of specialization involved. Students are also strongly encouraged to present their research at scientific conferences and publish the results of their thesis research in a peer-reviewed journal.

Students receive a grade of Y (incomplete) in these courses as long as the thesis in progress. Eventual thesis grades replace the incomplete grades upon formal completion of the thesis. In order to receive a grade of Y for ME-0296, students must submit a thesis prospectus that outlines the area of work, thesis goals, proposed approach and a review of relevant past work in the literature before the end of the first semester in which the student enrolls in ME-0296, typically the third semester of full-time study. An example of a recent MS thesis prospectus can be found in the Mechanical Engineering office.

The examining committee for MS candidates completing theses should be composed of three (3) members.

Thesis advisor (committee chair)
One technical expert outside of the ME department
A third member of the committee, often another faculty member in the ME department

The committee chair is normally a full-time, tenure-track faculty member. One committee member must be from outside the ME department. Thesis normally counts as 9 credits towards the MS degree requirements. However, a student, with the approval of his/her thesis advisor, has the option to complete a 6-credit thesis by submitting a petition form to the Department. This petition must be signed by the student and the thesis advisor and will become part of the student's academic record. With a 6-credit thesis, a student must complete an extra graduate-level course (for a total of 8 courses) to fulfill the 30-credit requirement for graduation. This option is not typically available to those intending to pursue a Ph.D. degree.

Thesis Completion

The MS thesis is completed upon:

A successful oral defense (open to the community)
Submittal of an approved thesis to the Office of Graduate Studies

The student should consult the Graduate Student Handbook for specific dates and deadlines for this process in the graduation semester.

Create Account
Login
Home

Browsing/Searching: UR Research > Mechanical Engineering Department > Mechanical Engineering Ph.D. Theses

Browse Publications
Browse Authors/Contributors
Browse Sponsors

Viewing: 1 - 25 of 59

Help |
Contact Us |
About |
Privacy Policy

Browse Works
Engineering

Mechanical Engineering

Research papers/topics in mechanical engineering, basic principle of machining and arc welding.

ABSTRACT This project tittle ‘’basic principle of machining’’ deal with the operations on lathe, milling and some part of arc welding, turning, taper turning, threading, knurling and chamfering, while on milling machine spur Gears were cut, forming a hexagon shape and square shape were all done on milling machine. A simple component/part which contained all the above mention operation were produced in one work piece. In conclusion we are able to produce spurs gears, square thread, an...

Design and Development of a Hybrid Bicycle

This project involved the conversion of a conventional bicycle into an electric hybrid bicycle using a hub motor, battery, controller, throttle, and battery indicator. The selection of a flywheel-based regenerative mechanism was justified based on its superior energy storage capabilities. The challenges faced during the assembly, including bearing and clutch drive iterations, were overcome through the use of multiple bearings, metal casting, and welding. The implementation of an indirect...

Multi-function e-scarecrow (MFeSC)

Humans have taken the (scarecrow) as a protector for these crops from the birds. There are various different types and designs for the scarecrows around the world. In this project we will develop the traditional scarecrows to become electronic and do more than one function at the same time (Multi-functions mechanism) .The (MFESC) consists of several components, the most important of them is the sensor, which performs many functions, including sensing the presence of birds’ sounds, as well a...

How Mechanical Engineering can Proffer Solution to the Economic and Political Situation in Nigeria

TABLE OF CONTENTS Executive summary ………………………………………………… 1.1 Introduction ………………………………………………………… 1.2 An overview of engineering ………………………………… ………. 1.3 Brief Overview of Mechanical engineering …………………………... 1.4 Who is an engineer ………………………………………………….….. 1.5 Economic situation in Nigeria …………………………�...

The Process Passed Through in the Production of Marble through Different Species.

CASE STUDY: ONSHORE FRONTIER LIMITED ❖Marble ❖The process passed through in the production of marble times through different species. AND Machines and processes involved in the production of marble tiles.

Optimize the Operational Parameters through Simulation to Increase the Efficiency of Combined Cycle Power Plants

ABSTRACT Electric power generation is one of the important factors for the development of peoples and can take an advantage of energy extraction technology of combined cycle in Sudan, which is highly effective in the States instead of remote power generation and combined cycle power plant also be economically feasible for use in sugar refineries in Sudan. . The purpose of this study is to find the maximum efficiency and minimum cost of power generation in combined cycle power plant by simul...

Design Analysis of HCCI Engine Piston

The piston is a heart of the engine and its working condition is the most exceedingly bad one of the key parts of the engine in the workplace. A piston is a segment of responding piston, responding pumps, gas compressors and pneumatic chambers, among other comparative systems. It is the moving part that is contained by a barrel and is made gas-tight by piston rings. In a piston, its motivation is to exchange force from growing gas in the barrel to the crankshaft through a piston bar and addit...

Energy and Exergy Analysis of Boiler Systems

ABSTRACT In this work, the results of the analysis of the NBC boiler plant using energetic and exergetic methods are presented. The main aim of this study is to investigate the effects of boiler rotary burner cup speed, oil nozzle size, excess air and fuel types on its performance and emissions with a view to identifying and quantifying components having greatest losses of energy and exergy efficiencies. Optimization of the boiler operating system is also carried out. The specific objective...

Exergetic Efficiency of Passive Solar Air Heater with Phase Change Energy Storage Material

ABSTRACT Energy and exergy analysis of solar air heater with phase change material energy storage is considered in this research work. Energy and exergy models for component systems like flat plate solar collector and phase change material in one-dimensional heat conduction in a cylindrical pipe, for storing periods were obtained. Exergy analysis, which is based on the second law of thermodynamics, and energy analysis, which is based on first law, was applied to improve system efficiency. M...

Fracture Mechanics of Glass Fibre Reinforced Polyester Composites (Gfrp) Subjected to Impact Load

ABSTRACT Glass mat reinforcement, which can be easily shattered, is widely used across the world in military, automobile, civil, railway and electronic engineering among others. This research investigated the fracture mechanics of reinforced polyester composites on exposure to sudden impact force, using experimental and analytical methods based on impact and Linear Elastic Fracture Mechanics (LEFM) test procedures, to study the stress distribution around crack tip and zone. Plies of randomly...

Use of Finite Time Thermodynamic Simulation of Performance of an Otto Cycle with Variable Specific Heats of Working Fluid

Abstract A finite time thermodynamic modelling and simulation of irreversible Otto cycle engines has been developed taking into account the variability of specific heats for working fluid due to temperature variation. The effect of three different parameters on the engine was discussed, which are: the internal irreversibility, the heat losses and the friction losses. A program was developed by using MATLAB software to perform the necessary calculations of thermodynamic model. According to t...

Effect of Delay Period on Performance of Compression Engine Running on Jatropha Fuel

Abstract Jatropha Biodiesel was tested in a single cylinder direct-injection, water cooled diesel engine to investigate the operational parameters of a small capacity diesel engine under five engine loads, constant speed test. The jatropha oil is used as a non edible oil to produce the biodiesel. The investigated blends were B0, B25, B50, B75 and B100, where (B#) denotes bio-diesel fuel volume percentage in diesel oil. The jatropha biodiesel was prepared locally in Sudan, specifications of wh...

Design and Construction of a Machine for the Production of Pulverized Coal-Rice Husk Briquettes

ABSTRACT The first part was the design and construction of a machine model using wood and the second part w pulverized coal-rice husk briquettes. The dt find the different loads due to shear stress on varlous parts or the nlachlne as the materials flow during consolidation. The loads obtained were used to dimension gears, shafts and pulleys that form the power transmission system of the machine. The machine was then drawn to produce a detail dimensional model in software form using AutoCAD. A...

Optimum Buckling Response Model of Grp Composites

ABSTRACT Relevant literature for the modeling and analysis of failure of GRP composites were reviewed. Samples of GRP composites were prepared by hand-lay up. Composites samples were subjected to compressive tests using a tensometer. Mechanical characteristics, such as modulus of elasticity; compressive strength, proportionality limit, elastic limit and critical strain of composites were evaluated from compression tests results. It was found that the compressive strength of all the samples is...

Improvement of the Performance of Thermal Power Systems Through Energy and Exergy Analysis

ABSTRACT This research work is aimed at using the energy and exergy analysis with thermodynamic data to suggest improvements in the performance of steam and gas turbine power plants. In this regard, specific data from Egbin steam power plant and Geregu I gas turbine power plant were used for the analysis. In the analysis, scientific tools such as Engineering Equation Solver (EES) programme with built-in functions for most thermodynamic and transport properties was used to calculate the enthal...

Mechanical Engineering is branch of engineering that deals with the design, construction, and use of machines Afribary curates list of academic papers and project topics in Mechanical Engineering. You can browse mechanical engineering project topics, mechanical engineering seminar topics, mechanical engineering thesis, Assignments, Termpapers etc

Popular Papers/Topics

Design & construction of hammer mill machine, design and construction of a refrigerator, design and construction of a mobile refrigerator, design and fabrication of an ice block making machine, construction of grain grinding machine, the design and fabrication of an electric popcorn frying machine, design and fabrication of a dust extractor, report on construction of nylon sealing and cutting machine., the design and fabrication of a iron shelling machine, construction of an electrical stove with three-oven apartment, the construction and fabrication of a candle moulding machine, design and implementation of simple scientific calculator., design and construction of motorised wheel barrow, construction of packed distillation column, fabrication of a polythiene bag sealing and cutting machine.

Home > College of Engineering > Dept. of Mechanical Engineering-Engineering Mechanics > Dissertations, Master's Theses and Master's Reports

Department of Mechanical Engineering-Engineering Mechanics

Dept. of Mechanical Engineering-Engineering Mechanics Dissertations, Master's Theses and Master's Reports

Explore our collection of dissertations, master's theses and master's reports from the Department of Mechanical Engineering-Engineering Mechanics below.

Theses/Dissertations/Reports from 2023 2023

ALTERNATIVE METHOD FOR LOW FREQUENCY IMPACT SOUND MEASUREMENT FOR BUILDING FIELD TESTS , Sunit Girdhar

AN ACTIVE VOICE COIL NEGATIVE STIFFNESS VIBRATION ISOLATOR WITH APPLICATION TO MOBILE 3D PRINTING , Lucas M. Schloemp

AN EXPERIMENTALLY VALIDATED COMPUTATIONAL MODEL FOR THE DEGRADATION AND FRACTURE OF MAGNESIUM-BASED IMPLANTS IN A CHEMICALLY CORROSIVE ENVIRONMENT , Mark M. Ousdigian

CAPTURING MICROSTRUCTURAL HETEROGENEITY AND PREDICTING LOCAL TRANSPORT PHENOMENA IN PEMFC CATALYST LAYERS: A COMPREHENSIVE NETWORK MODELING APPROACH , Shahriar Alam

DATA-DRIVEN IDENTIFICATION AND MODELING OF NONLINEAR DYNAMICAL SYSTEMS USING DEEP LEARNING , Abdolvahhab Rostamijavanani

DESALINATION SYSTEM WITH SORPTION-BASED ZERO LIQUID DISCHARGE TECHNOLOGY , Shiying Cai

DESIGN, DEVELOPMENT, AND TESTING OF AN INVERTED PENDULUM THRUST STAND FOR LOW POWER HALL-EFFECT THRUSTERS , Joshua M. Kalkman

DEVELOPMENT AND TESTING OF A LOW MASS VIBRATORY LUNAR COMPACTOR , Charles Carey

DYNAMIC MODE DECOMPOSITION APPROACH FOR ESTIMATING THE SHAPE OF A CABLE , Yash Manik Chavan

Dynamic Modeling and Predictive Control of a Multi-Mode Combustion Engine , Sadaf Batool

ENERGY ANALYSIS OF DROPLET IMPINGEMENT ON AN INCLINED WALL UNDER DIFFERENT TEMPERATURE ENVIRONMENTS , Jiachen Zhai

Enhancing Lithium-Ion Battery Equivalent Circuit Models: Innovations in Parameter Derivation and Simulation , Logan R. Canull

MATERIAL CHARACTERIZATION AND MULTIPHYSICS MODELING OF CARBON NANOTUBE THERMOACOUSTIC LOUDSPEAKERS , Mahsa Asgarisabet

MOLECULAR DYNAMICS MODELING OF POLYMERS FOR AEROSPACE COMPOSITES , Swapnil Sambhaji Bamane

Nanomaterials for Cardiovascular Engineering , Roya Bagheri

Neuroevolution and Machine Learning Research Applied to Connected Automated Vehicle and Powertrain Control , Frédéric F. Jacquelin

NOVEL BAYESIAN NEURAL NETWORKS AND UNCERTAINTY QUANTIFICATION OF COMPUTATIONAL MECHANICS MODELS , Ponkrshnan Thiagarajan

On The Gaussian-Core Vortex Lattice Model for The Analysis of Wind Farm Flow Dynamics , Apurva Baruah

PROGRAMMING THE BISTABLE DYNAMIC VIBRATION ABSORBERS OF A 1D-METASTRUCTURE FOR ADAPTIVE BROADBAND VIBRATION ABSORPTION , Shantanu H. Chavan

RELIABILITY-BASED DESIGN OPTIMIZATION OF BATTERY THERMAL MANAGEMENT SYSTEMS UNDER UNCERTAINTY , Shreyas P. Vaidya

STUDY OF DROPLETS INTERACTIONS ON SOLID SURFACE FOR MANUFACTURING APPLICATIONS , Menghan Zhao

STUDY OF ECO-DRIVING AND CHARGING PLANNING IN CONNECTED AND AUTOMATED VEHICLES ENVIRONMENT , Pradeep Bhat

Study of nanocomposite materials using molecular dynamics , Prashik Sunil Gaikwad

Theses/Dissertations/Reports from 2022 2022

3D-PRINTED CERAMIC VOLUMETRIC RECEIVERS: FROM HIERARCHICALLY-ORDERED TO NATURE-INSPIRED HIGH-FLUX SOLAR THERMAL COLLECTORS , Rasoul Bayaniahangar

A COUPLED VISCOPLASTIC-DAMAGE CONSTITUTIVE MODEL FOR SEMICRYSTALLINE POLYMERS , Jeffrey Wiersma

ADVANCED THIN-FILM SORPTION THERMAL ENERGY STORAGE SYSTEMS FOR THERMAL LOAD SHEDDING/SHIFTING , Ikechukwu E. Okoh

AN EXPERIMENTAL STUDY OF FUEL SELECTION FOR A GASOLINE MULTI-MODE, SPARK IGNITED – COMPRESSION IGNITION ENGINE , Zachary J. Stanchina

AN EXPERIMENTAL STUDY ON THE IMPACT OF WATER INJECTION ON THE PERFORMANCE AND EMISSIONS OF A NATURAL GAS – DIESEL PILOT ENGINE , Nic Tuma

AN EXPERIMENTAL STUDY TOWARDS UNDERWATER PROPULSION SYSTEM USING STRUCTURE BORNE TRAVELING WAVES , Shreyas suhas Gadekar

ATOMISTIC-CONTINUUM MEMBRANE AND MACHINE LEARNING MODELS FOR TWO-DIMENSIONAL MATERIALS , Upenda Yadav

CALIBRATION AND INJECTION RATE SHAPING APPROACHES USING 1D HYDRAULIC DIESEL INJECTOR MODELING FOR GASOLINE COMPRESSION IGNITION APPLICATIONS , Atharva Desai

CALORIMETRIC MEASUREMENTS OF LUNAR REGOLITH SIMULANT AND WATER. AN EXPERIMENTAL STUDY CORRELATING WEIGHT PERCENT WATER AND TEMPERATURE CHANGE THROUGH PERIODS OF PHASE CHANGE. , George B. Johnson

CHARACTERIZATION OF HYDRAULIC FLOW NOISE INDUCED BY SPOOL VALVES , Carter A. Paprocki

Collective Hydrodynamics of Robotic Fish , Rohit S. Pandhare

COMBUSTION DEVELOPMENT OF A HIGH LOAD HIGH-EFFICIENCY MICRO-PILOT DIESEL NATURAL GAS ENGINE , Vinicius Bonfochi Vinhaes

CONCEPT EVALUATION AND DEVELOPMENT OF A NOVEL APPROACH FOR INTEGRATION OF TURBOGENERATION, ELECTRIFICATION AND SUPERCHARGING ON HEAVY DUTY ENGINES , Satyum Joshi

Design and analysis of Marangoni-driven robotic surfers , Mitchel L. Timm

DESIGN AND REAL-TIME IMPLEMENTATION OF OPTIMAL MODEL-BASED TORQUE SHAPING AUTOMOTIVE CONTROL SYSTEMS , G. V. Prithvi Reddy

DEVELOPMENT AND VALIDATION OF A FORCE MEASURING DEVICE FOR A LABORATORY WAVE TANK , Jacob K. Colling

DEVELOPMENT OF ADVANCED MODELS FOR PRE-IGNITION PREDICTION IN GAS ENGINES AND ANALYTICAL MODEL FOR WALLFILM EVAPORATION , Ankith Ullal

Fracture Mechanics of Chemically Strengthened Glass: Experiment and Modelling , Benedict Osobomen Egboiyi

MICROSCALE TRANSVERSE COMPRESSION MODELING: A COMPARATIVE STUDY OF THE ANALYTICAL MAC/GMC METHODS TO EXPERIMENTAL RESULTS , Emily Zeitunian

MODEL PREDICTIVE CONTROL OF ENERGY SYSTEMS FOR HEAT AND POWER APPLICATIONS , Chethan Ramakrishna Reddy

Molecular Modeling of High-performance Polymers , Sagar Umesh Patil

MOLECULAR MODELING OF HIGH-PERFORMANCE THERMOSET POLYMER MATRIX COMPOSITES FOR AEROSPACE APPLICATIONS , Prathamesh P. Deshpande

NUMERICAL DESIGN OF STEERABLE GUIDEWIRES , Onkar Prakash Salunkhe

NUMERICAL DEVELOPMENT OF A SIX-STROKE GASOLINE COMPRESSION IGNITION ENGINE , Oudumbar Rajput

Optimal Control of Nonlinear Wave Energy Converters In Heave for Maximum Power Extraction , Kevin Nelson

Oxidative aging and fracture behavior of polymers and composites: theory, modeling and experiments , Shabnam Konica

PARTIALLY STRATIFIED COMBUSTION OF NATURAL GAS FOR SPARK IGNITION ENGINES , Philip S. Zoldak

Passivity-Based Numerical Modeling and Grid Integration Strategies For Wave Energy Converter Arrays , Salman Husain

PERMEABILITY, STRUCTURAL CHANGES, FLOW REGIME TRANSITIONS IN FUEL CELL CATALYST LAYERS AND A MODEL FOR PREDICTING TRAPPED SATURATION FOR TWO-PHASE FLOW IN POROUS MEDIA , Karrar Takleef Alofari

SORPTION-BASED DEHYDRATION SYSTEMS: THEORY-TO-DEMONSTRATION , Masoud Ahmadi

Wireless Power Transfer In Autonomous Mobile Microgrids , Carl Greene

Theses/Dissertations/Reports from 2021 2021

A COMBUSTION MODEL FOR MULTI-COMPONENT FUELS BASED ON RELATIVE REACTIVITY AND MOLECULAR STRUCTURE , Arash Jamali

ACTIVE GRAVITY OFFLOADING SYSTEM WITH INFRARED TRACKING FOR ROVER TESTING , Travis Wavrunek

An Exploration of the Practice of Engineering as Experienced Through the Capstone Course , Mary Raber

Application of Carbon Nanotube Thermophones as Duct Noise Cancelling Speakers: Using New Technology with Old Theories , Stephania M. Vaglica

Atomistic continuum simulations for nano-indentation and compression of multi-layer graphene , Ashwini Nikumbh

Autonomous Vehicle Obstacle Avoidance Maneuvers: Analytical and Experimental Development of Friction Surface Dependent Path Planning and Control , Nathan D. Spike

Base Vibration Effects on Additive Manufactured Part Quality: A Study of 3D Printing Onboard U.S. Navy Ships , Nick Jensen

COMMISSIONING AND TESTING OF A NEW DUSTY THERMAL VACUUM CHAMBER , Ben Wiegand

Comparison of Path Planning Approaches of Autonomous Vehicles for Obstacle Avoidance Application , Duo Zhang

CORRELATED SIMULATION OF PSEUDO TRANSIENT TORQUE CONVERTER CLUTCH ENGAGEMENT USING COUPLED FLUID-STRUCTURE INTERACTION , Aniket Vilas Beldar

Defect Detection using Dynamic Analysis for Additive Manufactured Metals , Gita Deonarain

DEFORMATION MANIFOLD LEARNING MODEL FOR MULTI WALLED CARBON NANOTUBES , Shashank S. Pathrudkar

DESIGN AND IMPLEMENTATION OF AN OXIDATION CATALYST FOR A SPARK IGNITED TWO STROKE SNOWMOBILE ENGINE , Noah Squires

Design and Testing of an Open Source Vacuum Oven for Research, Community Recycling, and Additive Manufacturing , Benjamin R. Hubbard

DEVELOPMENT AND VALIDATION OF DYNAMIC PROGRAMMING ALGORITHM FOR ECO APPROACH AND DEPARTURE , Vasu Goyal

Development of a Method to Model an Enclosed, Coaxial Carbon Nanotube Speaker with Experimental Validation , Suraj Prabhu

DEVELOPMENT OF AUTONOMOUS VEHICLE MOTION PLANNING AND CONTROL ALGORITHM WITH D* PLANNER AND MODEL PREDICTIVE CONTROL IN A DYNAMIC ENVIRONMENT , Somnath Mondal

Development of the Carbon Nanotube Thermoacoustic Loudspeaker , Troy Bouman

Economic Sustainability Analysis of Natural Leather Industry, And Its Alternative Advancements , Yogesh Kumar Satish Kumar

ELECTRICAL POWER TAKE-OFF SYSTEM DESIGN AND PERFORMANCE ASSESSMENT FOR POINT ABSORBER WAVE ENERGY CONVERTER , Xiang Zhou

EXPERIMENTAL EVALUATION AND SIMULATION OF TORQUE TRANSMISSIBILITY FREQUENCY RESPONSE FUNCTIONS OF VIBRATION ISOLATORS AND ABSORBERS FOR DRIVETRAIN APPLICATIONS , Luke Jurmu

HIGH INJECTION PRESSURE IMPINGING DIESEL SPRAY CHARACTERISTICS AND SUBSEQUENT SOOT FORMATION IN REACTING CONDITIONS , Zhihao Zhao

Hydrodynamics of Vibrating Perforated Plates , Muhammad Usman

INTEGRATED TORREFACTION-EXTRUSION SYSTEM FOR CONVERSION OF FIBER-PLASTIC WASTES INTO SOLID FUELS , Shreyas Kolapkar

INVESTIGATION OF A MACHINE-PLANT INTERFACE FOR EXTRACTING ROOTED INVASIVE AQUATIC PLANTS , Brad Baas

Marangoni Propulsion of Active Particles , Saeed Jafari Kang

MATHEMATICAL MODELING AND NUMERICAL SIMULATION OF HEAT TRANSFER FROM ISOLATED OBJECTS , Esmaeil Dehdashti

MEMBRANE-BASED HEAT SINK FOR ENHANCED FLOW BOILING PERFORMANCE AND RELIABILITY , Shivam Gupta

MODEL-BASED ENGINE-OUT EMISSIONS ANALYSIS FOR A GASOLINE TURBOCHARGED DIRECT INJECTION SPARK-IGNITED ENGINE IN ELEVATED HEV CRANKING SPEED , Amir Khameneian

MULTISCALE INVESTIGATION OF DROPWISE CONDENSATION ON A SMOOTH HYDROPHILIC SURFACE , Shahab Bayani Ahangar

Nonlinear Model Predictive Control of Wave Energy Converter , Isha Malekar

NOVEL NEW MODELING PROCEDURE FOR INDUSTRIAL MACHINERY WITH NONLINEAR CONNECTIONS , Steven Whitican

Phase field fracture modeling for chemically strengthened glass and Machine Learning for Reaction-- diffusion equations , Revanth Mattey

PHASE-FIELD FRACTURE MODELING FOR INTERLOCKING MICRO-ARCHITECTURED MATERIALS , Shubham Sinha

Sliding Mode Control of a Nonlinear Wave Energy Converter Model , Tania Demonte Gonzalez

STUDYING THE EFFECTS OF INITIAL CRACK ANGLE ON THE CRACK PROPAGATION IN GRAPHENE NANO-RIBBON THROUGH MOLECULAR DYNAMICS SIMULATIONS , Vijay Kumar Pathak

TORREFACTION OF MIXED SOLID WASTE , Zhuo Xu

TOWARDS SYSTEMS ON CLOTH: THE DESIGN, MANUFACTURING, AND VALIDATION OF OPEN-SOURCE EMBROIDERED RESISTORS , Somerset Schrock

Transient Maneuvers and Pressure Analysis on an Automotive Torque Converter , Abigail A. Hempy

TUNING LONGITUDINAL BANDGAPS USING COMPLIANT BISTABLE METASTRUCTURAL DESIGNS , Akshay Soma

UNMANNED GROUND VEHICLE (UGV) DOCKING, CONNECTION, AND CABLING FOR ELECTRICAL POWER TRANSMISSION IN AUTONOMOUS MOBILE MICROGRIDS , John Naglak

Theses/Dissertations/Reports from 2020 2020

3D PRINTING OF IRON OXIDE INCORPORATED POLYDIMETHYLSILOXANE SOFT MAGNETIC ACTUATOR , Rasoul Bayaniahangar

A BAYESIAN CONVOLUTIONAL NEURAL NETWORK BASED CLASSIFIER TO DETECT BREAST CANCER FROM HISTOPATHOLOGICAL IMAGES AND UNCERTAINTY QUANTIFICATION , Pushkar Khairnar

ACTIVE NOISE CONTROL USING CARBON NANOTUBE THERMOPHONES: CASE STUDY FOR AN AUTOMOTIVE HVAC APPLICATION , Walker H. Nelson

ANALYSIS OF A CIRCULAR RESONANT PLATE FOR SHOCK TESTING , Jon Markl

A Neural Network Approach to Estimate Buoy Mooring Line Sensor Deflection , Tom Price

The Van Pelt and Opie Library
About Digital Commons @ Michigan Tech
Collections
Disciplines

Advanced Search

Notify me via email or RSS

Author Corner

Content Policy
Department of Mechanical Engineering-Engineering Mechanics

Home | About | FAQ | My Account | Accessibility Statement

Privacy Copyright

George W. Woodruff School of Mechanical Engineering

Master's thesis process.

The Graduate Committee meets once a month to review and approve academic student matters; therefore, please plan accordingly.

Process Initiation

Step 1. Identify an advisor, a thesis topic, and your thesis reading committee

You are encouraged to talk to various faculty members regarding possible thesis topics and to begin this process immediately upon embarking on a degree program. Composition of your reading committee should be decided in conjunction with your advisor.
The committee consists of at least three members . The advisor or one of the co-advisors must be a tenure-track (academic) Woodruff School faculty member, or a Woodruff School research faculty member with an earned doctorate. Two members of the M.S. Thesis Reading Committee must be tenure-track (academic faculty with primary or joint appointments in the Woodruff School). All committee members must have an earned doctorate or equivalent professional experience.

Step 2. Submit the Request for Approval of Master's Thesis Topic Form

Complete the Request for Approval of Master's Thesis Topic form in the ME Graduate Handbook. Please go to the following link and follow the online instructions:

Request for Approval

Once the form is submitted, your faculty advisor will receive an automated email requesting a short justification for the composition of your reading committee.

Please Note: If a proposed member is not a Georgia Tech faculty member, a CV of that proposed member must also accompany the request. Please email the CV to your Staff Academic Advisor in the Office of Student Services.

Step 3. Receive approval from the Woodruff School Graduate Committee and then obtain signatures of remaining committee members

After the Woodruff School Graduate Committee approves your master's thesis reading committee and your Request for Approval of Master's Thesis Topic, you will receive an email from the Office of Student Services.
Please log into eSignature.gatech.edu to create an account with DocuSign. Once logged into DocuSign, complete the Request for Approval of Master’s Thesis Topic electronic form.

Please be sure to list Dr. Andrei Fedorov as the School Chair and your Staff Academic Advisor as the Graduate Coordinator. An email will send automatically requesting the required signatures. Everyone will receive a final, signed copy of the form.

Change in Thesis Title or Abstract

If there are any changes in your Thesis Title or Abstract, please complete a revised Request for Approval of Master's Thesis Topic form via DocuSign. Indicate on the form that this is only a change in title, abstract, or both. You and your advisor must sign the form. Changes to a master's thesis title or abstract are handled administratively and need not go to the Woodruff School Graduate Committee for approval.

Change in Thesis Reading Committee

If there are any changes to your Master's Thesis Reading Committee, it must be submitted to the Office of Student Services on a revised Request for Approval of Master's Thesis Topic form. Please follow the above instructions in steps 2 and 3 in order to have the new reading committee member(s) approved. If the person is not a Georgia Tech faculty member, please email the CV to your Staff Academic Advisor in the Office of Student Services.

Writing the Master's Thesis

The purpose of the master's thesis is to further your educational development by requiring you to plan, conduct, and report an organized and systematic study of importance. In keeping with the Woodruff School’s policy of educating both practicing and research engineers, a thesis might range from a design project to a fundamental research investigation. Although you may propose a thesis topic and seek an advisor, the usual procedure is for you to work on a problem suggested by a faculty member. If you are employed on a sponsored research project, the thesis will usually be derived from this work.

Introduction

Describe the need or question that is addressed in the project. Also, explain the benefits of addressing the need or answering the question, and explain briefly what solution you have developed.

Describe the background of the need or question, addressing some combination of the following:

A review of published literature
A survey of existing products or patents
A survey of industrial efforts to address the problem or need

Explain your strategy for addressing the problem, including theory and comparative benchmarks, as required. Describe the specific steps you have taken to address the problem, such as experimentation, computer modeling or simulation, and design and evaluation.

Results and Discussion

Present, explain, and evaluate the results obtained on each component of the project.

Summarize your conclusions and outline the questions raised or left open by your project.

Presentation

Step 1. Provide the completed written thesis to your committee members

Master's students who are preparing a thesis must give an oral presentation of their work. This presentation is not a formal defense. Rather, approval of the thesis is based upon the written document. The presentation may be scheduled only after the student’s thesis advisor has reviewed the completed written document and considers the thesis to be satisfactory.

Step 2. Schedule the M.S. Thesis Oral Presentation and submit the Thesis Presentation Announcement to the Office of Student Services

Poll the members of your reading committee to establish a date and time for the presentation. Reserve a room for your oral presentation. Submit your announcement at the following link:

Submit your announcement

This step must be completed at least two weeks (14 days) before the presentation. The announcement will be posted to the Woodruff School calendar.

Step 3. Submit Final Forms

The Thesis/Proposal/Dissertation Assessment form is now available in Qualtrics . Each committee member must complete the Qualtrics form at the conclusion of the presentation. The form will be routed to the Office of Student Services for further processing.
After your presentation, complete the Certificate of MS Thesis Approval form via DocuSign. Please list Dr. Andrei Fedorov as the Graduate Coordinator/Staff Administrator. Your committee will sign off on your form via the email request. Please email a copy of the completed signed form to your Staff Academic Advisor once you receive it back.
The committee chair will submit the forms to the Office of Student Services.

IMPORTANT NOTICE

You must be registered during the semester in which the final presentation occurs, unless an Enrollment Waiver is requested and approved.

Enrollment Waiver

Submitting the Master's Thesis

Format Check

You are urged to have your thesis format checked before making the final copies for your committee. To make an appointment to have the format of your thesis checked, please call the Graduate Thesis Office (Savant Building, Room 318) at 404-894-3092, or e-mail [email protected] .

There are deadlines for the initial format check that is one week before the final submission deadline. There is a recommended deadline, but initial format checks will not be done in the week leading up to the thesis deadline; only final submissions will be checked that week.

The specific requirements for the format, publication, and distribution of the thesis are explained here:

Theses & Dissertations Resources

Electronic Submission of Theses and Dissertations

Paper copies should be given to your advisor and the members of your reading committee, unless the members request a different format.

Please submit your theses electronically to the Graduate Studies office:

Electronic Submission

Enter the requested information about yourself and your thesis/dissertation and upload your thesis or dissertation in PDF format. Once you submit the documents electronically, an e-mail notice will be sent to your committee members.

The Thesis Approval Page will be the second page in your thesis/dissertation, but it will not show any signatures. List the committee members who approved your thesis or dissertation, but remove the signature lines and be certain you type in the date, which is the date that the final draft of your thesis/dissertation was approved.

The Graduate Office will check your electronic document and let you know about any corrections you must make. Make the corrections and resubmit the corrected file. If the Graduate Office has all the related documents, your thesis/dissertation will be approved and they will notify the Registrar's Office that you are eligible to graduate. Once you have graduated, your thesis/dissertation will be released for electronic circulation.

< Back to MS Degree Program

List Of Project/Thesis Topics For M.E. /M.TECH Mechanical Engineers.

STRUCTURAL ANALYSIS OF A FLAT
BED VIBRATION ANALYSIS OF A FLATBED
MECHANICAL AND THERMAL BUCKLING OF THIN FILMS
FATIGUE RESISTANCE ANALYSIS OF A FUEL INJECTION COMPONENT
DESIGN /ANALYSIS OF MACHINE TOOL ELEMENTS USING UNIGRAPHICS/ANSYS
VIBRATION ANALYSIS OF A ROTARY COMPRESSOR
FIELD PROBLEM OF A CABIN MOUNTING BRACKET OF LOAD-KING PRIDE
DESIGN AND ANALYSIS OF MINIATURE POSITIVE DISPLACEMENT PUMP
CAVITATION IN THE COOLING FLUID OF AN IC DIESEL ENGINE DUE TO FORCES GENERATED IN A PISTON-CYLINDER ASSEMBLY
INVESTIGATIONS ON SLIDING CONTACT CHARACTERISTICS OF FRP COMPOSITE BEARINGS

CUTTING DYNAMICS OF HIGH SPEED MACHINING OF THIN RIBBED STRUCTURES
STABILITY ANALYSIS OF BALL BEARING CONSIDERING THE EFFECT OF WAVINESS IN BALL BEARING ASSEMBLY SYNOPSIS
PRE-STRESSED MODAL ANALYSIS OF ENGINE SHROUD OF LAWN BOY ENGINE
OPTIMIZATION OF DIE EXTRUSION PARAMETERS USING FEM.
RANDOM VIBRATION ANALYSIS OF COMPRESSOR HOUSING:
OPTIMUM DESIGN AND ANALYSIS OF COMPOSITE DRIVE SHAFT FOR AN AUTOMOBILE
STRUCTURAL ANALYSIS OF A REFRIGERATOR COMPRESSOR CRANK SHAFT
STRUCTURAL STATIC ANALYSIS ON CRANKSHAFT BEARING ASSEMBLY
MODAL ANALYSIS OF INTAKE MANIFOLD OF A CARBURETTOR
STRUCTURAL STATIC ANALYSIS OF CYLINDER HEAD
OPTIMIZATION OF THE JIG DESIGN
MODAL ANALYSIS OF REFRIGERATOR COMPRESSOR CYLINDER HEAD
MODAL ANALYSIS OF VALVE PLATES AND COMPARE THE RESULTS BETWEEN THE TWO VALVE PLATES.
MODAL ANALYSIS OF SUCTION VALVE
TO PERFORM STRUCTURAL STATIC ANALYSIS ON A CRANK SHAFT
TO PERFORM STRUCTURAL STATIC ANALYSIS ON A FLANGE:
SIMULATION OF CENTRIFUGAL PUMP PERFORCE USING CFD TOOL AND OPTIMIZATION OF THE PUMP FOR THE IMPROVED PERFORMANCE
MODAL ANALYSIS OF MUFFLER GUARD
Thermal analysis of Coolant Plumbing pipe
HEAT TRANSFER IN THE CYLINDER HEAD OF A TWO-STROKE ENGINE
Chasis design for HCV
Analysis Of A C Class Adhesively Bonded Car Floor Structure Joints
Analysis Of A C Class Spot Welded Car Floor Structure Joints
Automotive System Design Of Lcv (Low Carbon Vehicle) Pick Up
Briquette Manufacturing In A Controlled Environment And Its Effects On Combustion
Crash Analysis Of Student Model Lcv Chassis For Low And High Speed Rear Impact
Design And Analysis Of Battery Carrying Structure Of An Automobile For Static And Dynamic Loading
Design Of Lcv (Low Carbon Vehicle) Diesel Hybrid Suv
Front Crash Analysis Of Student Model Lcv Chassis
Projects For Mechanical Engineering Students
Regenerative Suspension System Retrofitted To The Vehicle
Retrofit Kers (Kinetic Energy Recovery System) To Land Rover Vehicle
Study And Research On Regenerative Braking System
Study On Structural Behavior Of Automotive Muffler Through Fea
Study On Thermal Behavior Of Automotive Muffler
Study On Thermal Behavior Of Manifold Assembly
Thermal Behavior Of Exhaust Manifold (Thermal Fatigue Analysis)
Thermo Electric Energy Recovery System

CAD / CAM Projects List - Abstract , Report Download

New Mechanical Projects 2020 ( All Projects Post Index List )

Sachin Thorat

Sachin is a B-TECH graduate in Mechanical Engineering from a reputed Engineering college. Currently, he is working in the sheet metal industry as a designer. Additionally, he has interested in Product Design, Animation, and Project design. He also likes to write articles related to the mechanical engineering field and tries to motivate other mechanical engineering students by his innovative project ideas, design, models and videos.

One thought on “ List Of Project/Thesis Topics For M.E. /M.TECH Mechanical Engineers. ”

I am looking for technical support in Fuel cell storage thesis topic. Do you any colleague to support in this topic?

mechanical engineer thesis topics

IMAGES

VIDEO

COMMENTS

Top 150 Mechanical Engineering Research Topics [Updated]

How to Select Mechanical Engineering Research Topics?

Top 50 Mechanical Engineering Research Topics For Beginners

Top 50 Mechanical Engineering Research Topics For Intermediate

Top 50 Mechanical Engineering Research Topics For Advanced

Related Posts

Step by Step Guide on The Best Way to Finance Car

The Best Way on How to Get Fund For Business to Grow it Efficiently

Useful Links

The Best Mechanical Engineering Dissertation Topics and Titles

Introduction

2022 Mechanical Engineering Research Topics

Topic 2: Evaluation of the impact of combustion of alternative liquid fuels on the internal combustion engines of automobiles

Topic 3: An evaluation of the design and control effectiveness of production engineering on rapid prototyping and intelligent manufacturing

Topic 4: Investigating the impact of industrial quality control on the quality, reliability and maintenance in industrial manufacturing

Topic 5: Analysis of the impact of AI on intelligent control and precision of mechanical manufacturing

Covid-19 Mechanical Engineering Research Topics

Research to study the contribution of mechanical engineers to combat a COVID-19 pandemic

Research to know about the transformation of industries after the pandemic.

Damage caused by Coronavirus to supply chain of manufacturing industries

Research to identify the contribution of mechanical engineers in running the business through remote working.

Mechanical Dissertation Topics of 2021

Topic 2: Interaction between the Fluid, Acoustic, and vibrations

Topic 3: Combustion and Energy Systems.

Topic 4: Study on the Design and Manufacturing

Topic 5: Revolution in the Design Engineering

Best Mechanical Dissertation Topics of 2021

Topic 2: The Engineering Applications of Mechanical Metamaterials.

Topic 3: The Mechanical Behaviour of Materials.

Topic 4: Evaluating and Assessment of the Flammable and Mechanical Properties of Magnesium Oxide as a Material for SLS Process.

Topic 5: Analysing the Mechanical Characteristics of 3-D Printed Composites.

Topic 6: Evaluation of a Master Cylinder and Its Use.

Topic 7: Manufacturing Pearlitic Rail Steel After Re-Modelling Its Mechanical Properties.

How Can ResearchProspect Help?

Electro-Mechanical Dissertation Topics

Topic 9: Comparing The Elastic Modules of Different Materials at Different Strain Rates and Temperatures.

Topic 10: Analysing The Change in The Porosity and Mechanical Properties of Concrete When Mixed With Coconut Sawdust.

Topic 11: Evaluation of The Thermal Resistance of Select Materials in Mechanical Contact at Sub-Ambient Temperatures.

Topic 12: Analysing The Mechanical Properties of a Composite Sandwich by Using The Bending Test.

Mechanical Properities Dissertation Topics

Topic 14: The Use of Submersible Pumping Systems.

Topic 15: The Function of a Breather Device for Internal combustion Engines.

Topic 16: To Study The Compression and Tension Behaviour of Hollow Polyester Monofilaments.

Topic 17: Evaluating the Mechanical Properties of Carbon-Nanotube-Reinforced Cementous Materials.

Topic 18: To Evaluate the Process of Parallel Compression in LNG Plants Using a Positive Displacement Compressor

Topic 19: Applying Particulate Palm Kernel Shell Reinforced Epoxy Composites for Automobiles.

Topic 20: Changes Observed in The Mechanical Properties of Kevlar KM2-600 Due to Abrasions.

Order a Proposal

Industrial Application of Mechanical Engineering Dissertation Topics

Topic 2: To Solve Optimization Problems in a Mechanical Design by The Principles of Uncertainty.

Topic 3: Analysing The Applications of Recycled Polycarbonate Particle Materials and Their Mechanical Properties.

Topic 4: The Process of Locating a Lightning Strike on a Wind Turbine.

Topic 5: Importance of a Heat Recovery Component in an Internal Combustion Engine for an Exhaust Gas System.

Important Notes:

How to Structure your Mechanical Engineering Dissertation

About ResearchProspect Ltd

Free Dissertation Topic

Frequently Asked Questions

You May Also Like

Top 50 Emerging Research Topics in Mechanical Engineering

Table of contents

Do This… to Accept Your Paper

WhatsApp Channel

Mechanical Engineering Theses and Dissertations

Theses/Dissertations from 2022 2022

Theses/Dissertations from 2021 2021

Theses/Dissertations from 2020 2020

Theses/Dissertations from 2019 2019

Theses/Dissertations from 2018 2018

Theses/Dissertations from 2017 2017

Theses/Dissertations from 2016 2016

Theses/Dissertations from 2015 2015

Useful Links

ScholarWorks@UMass Amherst

Mechanical & Industrial Engineering Dissertations Collection

Dissertations from 2022 2022

Dissertations from 2021 2021

Dissertations from 2020 2020

Dissertations from 2019 2019

Dissertations from 2018 2018